V79中国仓鼠肺细胞 

【V79中国仓鼠肺细胞 】下面是细胞株培养的具体无菌技术要点：

1. 实验开始前，无菌室和无菌操作台需要紫外光照射30到60分钟完全灭菌，用70%ethanol擦拭无菌操作台面，并且打开无菌操作台风扇运行10分钟之后，才可以进行实验操作。每次操作只能处理一株细胞株，即使培养基完全相同也不可共用培养基，以避免细胞间污染或失误混淆。实验完成后，请将实验物品拿出工作台，用70%ethanol再次擦拭无菌操作台面。操作间隔应该让无菌操作台运转10分钟到15分钟后，才能进行下一个细胞株的操作。

2. 无菌操作工作的区域应保持清洁和宽敞，必要物品（试管架、吸管、吸取器或吸管盒等）可以暂时放置，其它实验用品使用完毕后应移出，有利于空气流通。实验用品需70%ethanol擦拭后方可带入无菌操作台内。实验操作过程应在台面的中央无菌区域内完成，请勿在边缘非无菌区域进行操作。

3. 小心取用无菌实验物品，避免细菌污染。请勿触碰吸管尖头部和容器瓶口处，也不要在打开的容器正上方进行操作。容器打开后，请用手夹住瓶盖并轻握瓶身，倾斜大约45°角取用，尽量不要将瓶盖口朝上放置于桌面。

4. 工作人员应当首先注意自身安全，必须穿戴齐实验衣和实验手套后才能进行实验。对于病毒感染或是来自人类的细胞株应当特别小心操作，并选择适当等级的无菌操作台进行（至少是Class II）。操作过程中，应避免引起aerosol的产生，小心有毒性药品，例如DMSO和TPA等，并避免针头的伤害等等。

5. 定期检测下列项目：

5.1. CO2钢瓶的CO2压力

5.2. CO2培养箱的CO2浓度、温度、和水盘是否有污染（水盘的水需用无菌水，每周定时更换）。

5.3. 无菌操作台内的airflow压力，定期更换紫外线灯管和HEPA过滤膜，预滤网（300小时/预滤网，3000小时/HEPA）。

6. 水槽内可添加消毒剂（Zephrin 1:750），需定期更换水槽中的水。

【V79中国仓鼠肺细胞 】齐一生物友情提醒，本产品仅供科研使用，不得用于临床及诊断使用！

一细胞说明，具体详细请见细胞附带说明书

 二、客户自备试剂

1、PBS  

2、 2、RPMI-1640 培养基（不含 Hepes）+ 10%胎牛血清+ 1%双抗

3、0.25%  （W/V）胰蛋白酶（含 0.02% EDTA）

三、细胞背景

1、生长方式：贴壁

2、种属：Homo sapiens  人

四、培养条件

1、培养基：RPMI-1640 培养基（不含 Hepes）+ 10%胎牛血清+ 1%双抗

2、温度：37.0°C

3、气体:空气  95%，CO2 5%

【V79中国仓鼠肺细胞 】五、培养方法

 收到细胞后，在倒置显微镜下观察整个细胞生长情况：

 如果细胞未长满，用 75%酒精喷洒整个瓶消毒后放到超菌台内，严格无菌操作，打开细胞培养瓶，留10ml 培养液继续培养。如果细胞已长满（达 80-90%）。即可进行传代，具六、体步骤如下：

1，弃去培养液，用PBS洗 1-2次。

2，向瓶内加入 1.0-2.0ml 胰蛋白酶液，在倒置显微镜下观察细胞消化情况，若细胞大部分变圆，迅速拿回操作台，吸取胰蛋白酶，加含有 6ml  含 10%血清的培养液，轻轻吹打细胞。

3，加入等量的的培养液，轻轻吹打混匀后吸出一半，分到新的培养

4，传代比例：1:2-1:3  

七、常见问题及解决方案

1、培养瓶有破裂，培养液有漏液：细胞极大可能会污染，所以我们会及时安排帮老师解决。

2、细胞漂浮：培养瓶不开封，瓶口酒精擦拭后平躺放置在培养箱。次日观察，如细胞大部分又贴回瓶底，表明细胞活力正常，剩余漂浮的细胞可以去掉，留 10ml 培养液培养观察，细胞生长至汇合度 80%，进行消化传代；如细胞还是不贴壁，将细胞离心收集转到新培养瓶，原培养瓶加部分培养液继续培养，中间注意观察，我们的技术人员会一直跟踪指导，直到问题解决。

细胞培养代理品牌

细胞培养代理品牌

【V79中国仓鼠肺细胞 】齐一生物科技（上海）有限公司是一家专业生产和销售各种生化试剂,细胞株、原代细胞、菌种、医药中间体,标准品和对照品的大型化学科技公司. 齐一生物销售：021－6034 8496；181214 53965；173021 04490；Web:www.qiyibio.com

9019491PLATE 384 WELL ADAPTOR GENERICCNY

9238885Cable, magnet lift, BS96CNY

9238883Keypad, BS96CNY

9238865#BR M96, Premium Agreement"Repair service delivery: onsite

Service response time (repair): 24 hours/1 business day

Periodic inspection/maintenance: yes, 1/agreement year

Inspection/maintenance delivery: onsite

Cost coverage for repair parts: yes, included

Cost coverage for labor: yes, included

Cost coverage for travel: yes, included

Replacement system (Loaner) provision: not included

Transportation cost coverage: not applicable"CNY

9238859#Full Agreement MDx, 2PM, 1yrThe Full Agreement MDx, 2 PM provides full service coverage for the BioRobot MDx. Costs for service visits are fully covered including travel, labor, ａnd parts. The agreement also includes two annual preventive maintenance visits, with costs for labor ａnd parts covered. With a Full Agreement, there is a priority response time of 48 hours (2 working days).CNY

9241219Warranty Performance Package, RCSCNY

9241209QIAsymphony SP, PM AgreementAn agreement for preventive maintenance provides coverage for travel, labor, ａnd parts, plus the cost of consumables required for the maintenance visit. Work carried out during the preventive maintenance visit is fully documented in accordance with GMP/GLP directives.CNY

9241212Full Agreement Depot Repair, MSTVtx, 1yr"The Full Agreement Depot Repair, MSTVtx provides full service coverage for the Multi-Specimen Tube Vortexer used in the digene HPV application. The service is conducted as an instrument exchange service. 

All shipping, labor ａnd repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days."CNY

9241185Sensor, interlock1, with cable, QXCNY

9238823Rect. carrier for 1 bottle 200 ml w/ capCNY

9238816Rect. carrier for 12 Vacutainertubes 7mlCNY

9233298Toothbelt, X-drive, P3xx0CNY

9237712#BR M96, InstallationCNY

9233267Motor, Y-drive, BR8000CNY

9233211Tubing, PVC transp., D5/d3mm, (per m)CNY

9237156Controller Board XYPCNY

9237122Upgrade App., QIAprep TurboTake advantage of our instrumentation ａnd molecular biology expertise to install QIAprep Turbo 96 on your BioRobot System. The onsite protocol installation visit includes all travel ａnd labor for the visit to install the standard QIAGEN QIAprep Turbo protocol, plus the QIAprep Turbo 96 BioRobot 8000 Kit (4-plate) SAP #962141CNY

9237096Training, BR QIAGEN IntroductoryA minimum of 4 people are required to attend this training. The QIAGEN BioRobot Systems Introductory Training is offered at QIAGEN training facilities to refresh current users or introduce new users to the QIAGEN BioRobot Systems hardware ａnd QIAsoft Operating System software.  Participants are given an overview of the hardware system ａnd maintenance/troubleshooting procedures before exploring the three software environments of the QIAsoft Operating System.  Each software environment is explained in detail, ａnd users are taken step by step through each section with explanations on how to best adjust or write new protocols for their BioRobot System.  An introduction to teaching new ａnd exisiting slots ａnd racks is followed by writing a new protocol which uses these with the three available pipetting options, pooling, distributing ａnd transfer.  Users are encouraged to write protocols in the proper format creating prompts, flushes, ａnd correct pipetting parameters.  The training concludes as protocols are tested ａnd run reinforcing concepts ａnd demonstrating success.CNY

9237094Training, LiquiChip On-siteOn-site Training 1 day LiquiChipCNY

9021147Bottle, Reagent (with cap assy), DCUCNY

9021110Skin Panel, Upper Left Rear, DCUCNY

9021105Skin Panel, Output Drawer, DCUCNY

9021082PLC Module, Dual RS-232, Slot 7, DCUCNY

9021073Gateway 1, CC-Link, DCUCNY

9021048Set, SP-AS assembly, QsymCNY

9020935Kit, calibration, overshoot, RGQCNY

9020711Table plate, complete, C18CNY

9020628Door, consumables, right, Cabinet QsymCNY

9020602Packing Foam Set - DML2000CNY

9020353SOW RGQ Software (RGQ Series II)CNY