日本松下光耦继电器

光耦继电器其特点：无机械触点，因此没有触点的磨损，使用寿命接近于无限；无震动和弹跳；小体积，高信赖性； AC/DC 兼用；高速切换；低放电电压；低动作电流；低开路时的漏电电流。可控制各种负载（微小模拟信号的开闭、继电器、电灯、发光二极管、加热器、马达、电磁吸筒等）。接点类型有： 1 常开、 1 常闭、 1 开 1 闭、 2 常开、 2 常闭。广泛应用于测量仪器、可编程控制器、通讯器械、工业器械、医疗器械、安全系统、家电、办公自动化、监测系统等领域。
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特长：
1、小模拟信号控制：PhotoMos继电器具有很低的偏置电压，可用于微小模拟信号控制而无失真。
           2、小输入信号进行控制。
           3、可控制象继电器，电动机，灯和线圈等不同的负载。
           4、光电藕合具有高绝缘性：不象机械式的，PhotoMos继电器通过LED和光电元件的结合，利用光来传递信号，所以具有非常高的绝缘。
           5、驱动回路输入侧无需；护二极管。
           6、安定的导通电阻。
           7、低开路漏电流。
           8、无需功率继电器的电源：由于内藏有光电元件，所以不需要驱动功率继电器的电源可简化回路和易于PC板的小型化。
           9、低热电动势（约1uV）
用途：高速栓测设备、电话设备、数据通信设备、计算机。
AQV212,AQV212A,AQV212AX,AQV212AZ,AQ5212,AQV215A,AQV215AX,AQV215AZ,AQV217,AQV217A,AQV217AX,AQV217AZ,AQV210,AQV210A,AQV210AX,AQV210AZ,AQV214,AQV214A,AQV214AX,AQV214AZ,AQV216,AQV216A,AQV216AX,AQV216AZ,AQV210E,AQV210EA,AQV210EAX,AQV210EAZ,AQV214E,AQV214EA,AQV214EAX,AQV214EAZ,AQV214EH,AQV214EHA,AQV214EHAX,AQV214EHAZ,AQV210EH,AQV210EHA,AQV210EHAX,AQV210EHAZ,AQV214H,AQV214HA,AQV214HAX,AQV214HAZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、低导通电阻常闭型：内装有采用本公司独自开发的二重扩散选择掺杂质法（DSD)制作的MOSTET.2、小模拟信号控制：PhotoMos继电器具有很低的闭路偏置电压，要用于微小模拟信号控制而无失真。3、高灵敏度，低导通电阻：5mA的输入电流能控制最大0.12A的负载电流。50欧（AQV414E)的低导通电阻，同于无金属触头所以能可靠地动作。4、低无路漏电电流：SSR有几个uA的开路漏电电流，而PhotoMos继电器即便在额定400V（AQV414E）的负载电压时也仅有100pA的漏电电流。5、提供耐高绝缘电压5000V型：内部的输入，输出端间绝缘距离大于0.4mm,符合IEC950(高绝缘型）标准。用途：电话设备（拨号，揿按）和测量仪器。AQV414,AQV414A,AQV414AX,AQV414AZ,AQV414E,AQV414EA,AQV414EAX,AQV414EAZ,AQV414EH,AQV414EHA,AQV414EHAX,AQV414EHAZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、SO封装，4脚型超小型化设计：尺寸(W)4.3＊(L)4.4＊(H)2.1mm.2、带与盘式包装：为标准的（1000pcs/盘），便于自动插装机使用。3、内装有采用本公司独自开发的二重扩散选择掺杂质法（DSD)制作的MOSTET。4、PhotoMos继电器具有很低的闭路偏置电压，要用于微小模拟信号控制而无失真。5、SSR有几个mA的开路漏电电流，而PhotoMos继电器即便在额定400V的负载电压时也仅有100pA（AQY214S）的漏电电流.用途:通信设备（PC,电子书写板、试验测量仪器、工厂自动化设备、保安设备、高速检测设备。 AQY210SX,AQY214SX,AQY414SX,AQY210SZ,AQY214SZ,AQY414SZ.＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特点：1、1-回路（a或b型）的超小型化设计。2、低导通电阻（最大50瓯）400V常闭型：内装有采用本公司独自开发的二重扩散选择掺杂质法（DSD)制作的MOSTET。3、带与盘式包装：为标准的（1000pcs/盘），便于自动插装机使用。4、PhotoMos继电器具有很低的闭路偏置电压，要用于微小模拟信号控制而无失真。5、SSR有几个mA的开路漏电电流，而PhotoMos继电器即便在额定400V的负载电压时也仅有100pA（AQY214S）的漏电电流。6、低热电势（约1uV）。用途：电话，测量仪器，计算机，工业用机器人，高速检测设备。AQV212SX,AQV215SX,AQV217SX,AQV210SX,AQV214SX,AQV216SX,AQV414SX,AQV414SZ,AQV212SZ,AQV215SZ,AQV217SZ,AQV210SZ,AQV214SZ,AQV216SZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特点：1、2-回路超小型化设计SO封装。3、带、盘式包装为标准的（1000pcs/盘），便于自动插装机使用。4、PhotoMos继电器具有很低的闭路偏置电压，要用于微小模拟信号控制而无失真。5、SSR有几个mA的开路漏电电流，而PhotoMos继电器即便在额定400V的负载电压时也仅有100pA（AQY214S）的漏电电流。用途：电话，测量仪器，计算机，工业用机器人，高速检测设备。AQW210SX,AQW214SX,AQW210SZ,AQW214SZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、带MOSTET和光电耦合器的多功能型：与传统的PhotoMos继电器和光耦合元件，PhotoMos继电器和2光耦合元件各自独立的型澡同，新型多功能型的将PhotoMos继电器和光耦合器件封装在一个SOP 壳内。2、将两种器件组合在一起使得尺寸大为减少。3、PC卡和传真/调制解调器的应用例：小尺寸化提供了剩余的空间，便以在不牺牲MOSFET继电器和光耦合器件的组合机能的情况下，增加了功能。用途：PCMCIA/JEIDA标准FAX/Modem卡。AQW210TSX,AQW210T2SX,AQW210TSZ,AQW210T2SZ
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、紧凑型8-引脚DIP形2、可用于2a型及2个独立的1a型3、小模拟信号控制：PhotoMos继电器具有很低的闭路偏置电压，要用于微小模拟信号控制而无失真。4、SSR有几个mA的开路漏电电流，而PhotoMos继电器即便在额定400V的负载电压时也仅有100pA（AQW214）的漏电电流。5、高灵敏度，高响应速度：5mA的输入电流可控制最大到0.13A的负载电流。310us（代表性）的高速动作（AQW214).6、低热电动势（约1uV.7、输入侧的驱动回路中无需反向电势；护二极管。8、安定的导通电阻 。9、无需驱动功率MOSFET的电源。用途：高速检测设备、电话设备、计算机。AQW212,AQW215,AQW217,AQW210,AQW214,AQW216,AQW212A,AQW215A,AQW217A,AQW210A,AQW214A,AQW216A,AQW212AX,AQW215AX,AQW217AX,AQW210AX,AQW214AX,AQW216AX,AQW212AZ,AQW215AZ,AQW217AZ,AQW210AZ,AQW214AZ,AQW216AZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、约占由1a型和1b型组成的photoMOS继电器的一半位置。
2、可用于1a,1b型和2个独立的1a,1b型。3、低热电动势（约1uV).
4、输入侧的驱动回路中无需反向电势；护二极管。5、5mA的输入电流可控制最大到0.13A的负载电流。6、高速开关速度：标准300ns的动作时间。7、无需驱动功率MOSFET的电源。8、具有很低的闭路偏置电压，可用于微小模拟信号控制而无失真。9、安定的导通电阻。
AQW614,AQW614A,AQW614AX,AQW614AZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、扁平型（W）8.8＊（D)9.3＊(H)3.9MM。2、高容量，支持不同种类的负载控制，额定电压下从非常小的负载到最大2A为止。3、高灵敏度，低导融电阻5mar 输入电流下最大可控制到2A的负载电流。
AQY272,AQY275,AQY277,AQY274,AQY272A,AQY275A,AQY277A,AQY274A,AQY272AX,AQY275AX,AQY277AX,AQY274AX,AQY272AZ,AQY275AZ,AQY277AZ,AQY274AZ,
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、扁平型（W）8.8＊（D)19.46＊(H)3.9MM。2、高容量，支持不同种类的负载控制，60伏额定电压（AQW272)下从非常小的负载到最大1.8A为止。3、高灵敏度，低导融电阻5ma 输入电流下最大可控制到1.8A的负载电流,导通电阻小于0.11欧。
AQW272,AQW275,AQW277,AQW274,AQW272A,AQW275A,AQW277A,AQW274A,AQW272AX,AQW275AX,AQW277AX,AQW274AX,AQW272AZ,AQW275AZ,AQW277AZ,AQW274AZ.
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、扁平13脚SIL的回路（4a）GUPHOTOMos继电器。2、用于4a型及4个独立的1a型。3、小模拟信号控制，photoMos继电器具有很低的闭路偏置电压，可用于微小模拟信号控制而无失真。4、低开路漏电电流（一般100v负载电压下为100pA).5、光学耦合具有非常高的绝缘性能。6、输入侧的驱动回路中无需加反向电势 ，护二级管。7、pc板的配置简单易行。8、无需单独的驱动功率MOSFET的电源。9、低热电势（约1V).10 、插装方向无限制。11、无火花，无振动，无杂音。
AQX21444
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
特性：1、高灵敏度和低导通电阻。2、不同种类的负载，如：继电器，电动机，灯及线圈等的控制。3、光电耦合具有极高的绝缘性能。4、低开路漏电流。
AQV251,AQV252,AQV255,AQV257,AQV253,AQV254,AQV259,AQV258,AQV253H,AQV254H,AQV251A,AQV252A,AQV255A,AQV257A,AQV253A,AQV254A,AQV259A,AQV258A,AQV253HA,AQV254HA,AQV251AX,AQV252AX,AQV255AX,AQV257AX,AQV253AX,AQV254AX,AQV259AX,AQV258AX,AQV253HAX,AQV254HAX,AQV251AZ,AQV252AZ,AQV255AZ,AQV257AZ,AQV253AZ,AQV254AZ,AQV259A,AQV258AZ,AQV253HAZ,AQV254HAZ,
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊

特性：
 1：小型化偏平4脚SIL形的高容量PHOTOMOS继电器。
2：极低的导通电阻。
3：小模拟信号控制。
4：低开路漏电控制。
5：简化了线路板的布置限制。
6：装插方向无限制。
7：提供不同的组合型。
8：用途：高速检测设备。电信设备，自动化设备，工业设备，办公设备，IC检查仪等。
AQZ202，  AQZ205，  AQZ207，  AQZ204， AQZ102，  AQZ105， AQZ107，  AQZ104。