您的位置:首页 > 产品展厅 > 化工原料 > 化学试剂 > 生化试剂 > 牛棘球蚴(echinococciosis)现货
齐一生物销售:021-6034 8496;181214 53965;173021 04490
1。我必须运行所有的标准和样品的重复?
是的,重复的运行,以监测测定的精度和提高检测结果的信心。
2。我必须在一次运行所有的样品吗?
不,每个试剂盒采用stripwell微孔板。这允许用户在不同的时间来分析不同数量的样品。
3。什么类型的可重复性的结果,得到与分析?
每一个工具都有一个包含一个典型数据的图表的手册。在运营商的任何变化,移液和洗涤技术,培养时间、温度、试剂盒的年龄可以引起变化的结果。每个用户都应该得到自己的标准曲线。
4。是否有可能储存的试剂比表示?
在不推荐使用条件下的部件组件的存储,以保证测试的正确性能。
5。我应该如何储存我的样品?
样品应保存在-20°C或更低的温度。长期储存,建议冻结他们在- 70余。
6。我可以修改协议吗?
BG的ELISA试剂盒进行了优化,提供最佳的结果。修改的格式或协议可能会给出错误的结果。
7。我可以使用一个不建议在试剂盒插入的样本类型吗?
该试剂盒已被验证在试剂盒插入的样品类型。未经检验的样品类型。为进一步信息的联系技术服务。
8。我的样本产生的值,在动态范围内的测定。我可以使用这些值吗?
建议只有在标准曲线的范围内下降的样本值。标准曲线的范围内的值一般是非线性的,这可能导致不正确的外推值。产生值高于最高标准的样品应为(进一步)稀释和重复。如果样品低于该测定的范围内,该样品被认为是不可检测的。
9。我每次都要运行一个空白或零标准吗?
是的,这些都是必需的计算,并反映任何微妙但显着的性能变化,从一天到一天,检测到检测。当排除特定的检测问题的来源时,它们也非常有帮助。
10。我能改变我在检测中使用的样本量吗?
不建议你改变卷由于BG工具被设计为最佳的性能在给定的体积
11。可以使用不同的组件组件吗?
每一个组件包含有特定批号的组件,以确保所有的组件都进行优化,以及与组件中的所有其他组件。对这些特定的地段进行质量检验。这是从来没有建议使用你自己的组件或组件从其他包或供应商。
12。我的标准曲线看起来很好,但我没有得到一个信号,我的样本,当我预期,为什么?
样品不包含被分析物。一个矩阵的效果可能是掩盖检测。确保推荐的稀释液在试剂盒插入后按规定进行。如果建议稀释,请检查是否正确进行稀释。过稀释会导致样品在标准曲线的范围内下降。
13。你怎么推荐我洗盘子?
如果您使用的是一个自动平板洗衣机,我们建议定期检查校准,并将该系统在洗涤前冲洗缓冲液冲洗。手动洗衣机也是一样的。一个中继器或洗瓶也可以使用。用户应小心,以确保所有的内容都是送气和板拍干的无尘纸。【牛棘球蚴(echinococciosis)现货】
14。我需要用一个盘子吗?
可靠的结果可以得到无板振动,但外径的一般会低于那些使用平板振动器。
15。为什么我要用波长校正450-570nm之间?
对于酶联免疫吸附试验,在双波长读的是做正确的光密度贡献的塑料以及,灯和光学波动。
16。如果我提我的样本,我还需要遵循推荐的稀释液试剂盒中插入了吗?
提取过程中所需的样本稀释量将受到影响的纯化和浓度的影响的协议使用。稀释或浓缩的金额将由最终用户决定。
17。什么是预期的分析物浓度,我应该找到?
一个给定的分析物的量可能会有所不同,不仅从物种的物种,但也组织和细胞来源。这个信息的最佳来源是目前的文献,很容易通过互联网在多个科学数据库访问。
18。我的光密度有点高(或较低),比那些在手册中,与我的试剂盒来了。为什么?
光学密度受影响
1. Do I have to run all of my standards and samples in duplicate?
Yes, the duplicates are run in order to monitor assay precision and increase confidence in the assay results obtained.
2. Do I have to run all of my samples at one time?
No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.
3. What types of reproducible results are obtained with the assays?
Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
4. Is it possible to store the reagents other than indicated?
Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.
5. How should I store my samples?
Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.
6. Can I modify the protocol?
BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate and wrong results.
7. Can I use a sample type that is not recommended in the kit insert?
The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.
8. My samples generated values that were outside the dynamic range of the assay. Can I use these values?
It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted and the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【牛棘球蚴(echinococciosis)现货】
9. Do I have to run a Blank or Zero Standards every time?
Yes, these are required for the calculations, and reflect any subtle but significant performance changes from day to day and assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.
10. Can I alter the volume of sample I use in the assay?
It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes
11. Can components from different kits be used?
Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.
12. My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?
The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.
13. How do you recommend I wash my plate?
If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, and that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated and the plate tapped dry on lint-free paper.
14. Do I need to use a plate shaker?
Reliable results can be obtained without a plate shaker, but the O.D.'s will generally be lower than those obtained using a plate shaker.
15. Why do I have to use wavelength correction between 450-570nm?
For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp and optical fluctuations. 【牛棘球蚴(echinococciosis)现货】
16. If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?
The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification and concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.
17. What is the expected concentration of analyte that I should expect to find?
The amount of a given analyte may vary not only from species-to-species, but also between tissue and cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.
18. My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?
The optical density is affected by a number of physical conditions such as time and temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.
19. What are the reasons for High Background?
1) Improper Washing: Check volume of washing buffer reservoir and make sure all recommended washing steps are performed.
2) Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【牛棘球蚴(echinococciosis)现货】
3) Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.
4) Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times and temperatures. However, if all wells are intensely and equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.
QC123 考马斯亮蓝染色液 500ml
QC124 碱性磷酸酶活性检测试剂盒 20次
QC125 碱性磷酸酶活性检测试剂盒 100次 【牛棘球蚴(echinococciosis)现货】
QC126 Bradford蛋白质定量试剂盒 100 ml
QC127 BCA蛋白质定量试剂盒 100 ml
QC128 GST融和蛋白纯化试剂盒 20次
QC129 Qis6 融和蛋白纯化试剂盒 10次
QC130 Flag融和蛋白纯化试剂盒 10次
QC131 QA融和蛋白纯化试剂盒 10次
QC132 Myc融和蛋白纯化试剂盒 10次
QC133 30%单/双丙烯酰胺预制胶溶液(37.5:1) 100ml
QC134 30%单/双丙烯酰胺预制胶溶液(37.5:1) 500ml
QC135 40%单/双丙烯酰胺预制胶溶液(37.5:1) 100ml
QC136 40%单/双丙烯酰胺预制胶溶液(37.5:1) 500ml
QC137 丙烯酰胺(Acrylamide) 1 Kg
QC138 丙烯酰胺(Acrylamide) 5 Kg
QC139 N,N-亚甲基双丙烯酰胺(别名甲叉双丙烯酰胺) 50 g
QC140 N,N-亚甲基双丙烯酰胺(别名甲叉双丙烯酰胺) 250 g
QC141 增强型化学发光试剂(ECL) 50 ml 【牛棘球蚴(echinococciosis)现货】
QC142 增强型化学发光试剂(ECL) 100 ml
QC143 增强型化学发光试剂(ECL) 250 ml
QC144 5ⅹWestern Blot 膜封闭液 200 ml
QC145 10ⅹWestern Blot膜冲洗液 1000 ml
QC146 增强型QRP-DAB底物显色试剂盒 100 ml
QC147 增强型QRP-DAB底物显色试剂盒 500 ml
QC148 TMB底物显色试剂盒 100 ml
QC149 TMB底物显色试剂盒 500 ml
QC150 PVDF膜 20cm×20cm(10张)
QC151 PVDF膜 20cm×20cm(25张)
QC152 硝酸纤维素膜(NC) 20cm×20cm(10张)
133181 NeXtalStock Citric acid pH 3.2 (200) CNY
9018537 Sensor, touch screen, Qsym CNY
9018484 External Tube Rack, EZ1a CNY
133108 NeXtalStock Sodium bromide (200) CNY
9001880 QIAsymphony SP, Priority QIAsymphony SP, Priority includes the QIAsymphony SP system for automated sample prep, installation and extended warranty. Installation covers hardware and software installation of the QIAsymphony instrument and provides the user with introductory training. Priority package extends warranty period of the system to 2 years. One preventive maintenance visit is included for each year of the warranty; 2 preventive maintenance visits in total. The service package includes all parts, labor and travel costs with a service response time of 48 hours (2 working days). Performance of installation and service visits are documented on a GMP/GLP-compliant Field Service documents CNY
9001868 Rotor-Gene Q 5plex HRM (PC) PrioPLUS "Rotor-Gene Instrument
Installation of Rotor-Gene & Introductory training
Warranty extension to 3 yrs
Repair Center service, response 7-10
Loaner available in 2 days*
Annual Inspections (1 onsite PM per yearr)
Priority service provision over non-contract customers
Documented installation & PM report
Unlimited number of repair service
All cost covered (travel, labor, parts)" CNY
953336 MagAttract DNA Mini M48 Kit (192) For 192 DNA preps: MagAttract Suspension B, Buffers, Proteinase K CNY 【牛棘球蚴(echinococciosis)现货】
9018460 Pilot valve, QX CNY
9015465 Interlock switch 1, for door CNY
204952 QuantiFast Multiplex RT-PCR +R Kit (80) CNY
133175 NeXtalStock Citric acid pH 2.0 (200) CNY
291023 mericon GMO Screen 35S-pat (24) CNY
9001700 Rotor-Gene Q 5Plex no PC CNY
9012345 SamTrak positive sample identification CNY
1067926 Buffer FG1 (825 ml) CNY
133085 NeXtalStock PEG 4,000 (200) CNY
38021 MAL Cartridge (1ml) CNY
9015362 Cable, T-nt comm. CNY
133162 NeXtalStock CAPS pH 10.8 (200) CNY
133160 NeXtalStock CAPS pH 10.4 (200) CNY
133069 NeXtalStock MOPS (200) CNY
133067 NeXtalStock Methanol (200) CNY
922902 LiquiChip System Fluid LiquiChip System Fluid (10x concentrate, 5 liters), for 50 liters working solution CNY 【牛棘球蚴(echinococciosis)现货】
290053 mericon VTEC stx1/2 Kit (24) CNY
290025 mericon L. monocytogenes Kit (96) CNY
204454 QuantiFast Probe RT-PCR Kit (400) CNY
204345 QuantiTect Probe PCR Kit (1000x50µl) 20For 1000 x 50 ul reactions: 25 ml QuantiTect Probe PCR Master Mix (providing a final concentration of 4 mM MgCl2), 20 ml RNase-free water CNY
9015358 Inverter, UV lamp CNY
9015340 Board, SGB CNY
380615 Investigator Hexaplex ESS Kit (100) CNY
9001421 QIAxcel "long
descr" CNY
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:齐一生物科技(上海)有限公司发布并且负责版权等法律责任。
易推广客服微信