您的位置:首页 > 产品展厅 > 化工原料 > 化学试剂 > 生化试剂 > 可乐宁检测试剂盒
齐一生物销售:021-6034 8496;181214 53965;173021 04490
1。我必须运行所有的标准和样品的重复?
是的,重复的运行,以监测测定的精度和提高检测结果的信心。
2。我必须在一次运行所有的样品吗?
不,每个试剂盒采用stripwell微孔板。这允许用户在不同的时间来分析不同数量的样品。
3。什么类型的可重复性的结果,得到与分析?
每一个工具都有一个包含一个典型数据的图表的手册。在运营商的任何变化,移液和洗涤技术,培养时间、温度、试剂盒的年龄可以引起变化的结果。每个用户都应该得到自己的标准曲线。
4。是否有可能储存的试剂比表示?
在不推荐使用条件下的部件组件的存储,以保证测试的正确性能。
5。我应该如何储存我的样品?
样品应保存在-20°C或更低的温度。长期储存,建议冻结他们在- 70余。
6。我可以修改协议吗?
BG的ELISA试剂盒进行了优化,提供最佳的结果。修改的格式或协议可能会给出错误的结果。
7。我可以使用一个不建议在试剂盒插入的样本类型吗?
该试剂盒已被验证在试剂盒插入的样品类型。未经检验的样品类型。为进一步信息的联系技术服务。
8。我的样本产生的值,在动态范围内的测定。我可以使用这些值吗?
建议只有在标准曲线的范围内下降的样本值。标准曲线的范围内的值一般是非线性的,这可能导致不正确的外推值。产生值高于最高标准的样品应为(进一步)稀释和重复。如果样品低于该测定的范围内,该样品被认为是不可检测的。
9。我每次都要运行一个空白或零标准吗?
是的,这些都是必需的计算,并反映任何微妙但显着的性能变化,从一天到一天,检测到检测。当排除特定的检测问题的来源时,它们也非常有帮助。
10。我能改变我在检测中使用的样本量吗?
不建议你改变卷由于BG工具被设计为最佳的性能在给定的体积
11。可以使用不同的组件组件吗?
每一个组件包含有特定批号的组件,以确保所有的组件都进行优化,以及与组件中的所有其他组件。对这些特定的地段进行质量检验。这是从来没有建议使用你自己的组件或组件从其他包或供应商。
12。我的标准曲线看起来很好,但我没有得到一个信号,我的样本,当我预期,为什么?
样品不包含被分析物。一个矩阵的效果可能是掩盖检测。确保推荐的稀释液在试剂盒插入后按规定进行。如果建议稀释,请检查是否正确进行稀释。过稀释会导致样品在标准曲线的范围内下降。
13。你怎么推荐我洗盘子?
如果您使用的是一个自动平板洗衣机,我们建议定期检查校准,并将该系统在洗涤前冲洗缓冲液冲洗。手动洗衣机也是一样的。一个中继器或洗瓶也可以使用。用户应小心,以确保所有的内容都是送气和板拍干的无尘纸。【可乐宁检测试剂盒】
14。我需要用一个盘子吗?
可靠的结果可以得到无板振动,但外径的一般会低于那些使用平板振动器。
15。为什么我要用波长校正450-570nm之间?
对于酶联免疫吸附试验,在双波长读的是做正确的光密度贡献的塑料以及,灯和光学波动。
16。如果我提我的样本,我还需要遵循推荐的稀释液试剂盒中插入了吗?
提取过程中所需的样本稀释量将受到影响的纯化和浓度的影响的协议使用。稀释或浓缩的金额将由最终用户决定。
17。什么是预期的分析物浓度,我应该找到?
一个给定的分析物的量可能会有所不同,不仅从物种的物种,但也组织和细胞来源。这个信息的最佳来源是目前的文献,很容易通过互联网在多个科学数据库访问。
18。我的光密度有点高(或较低),比那些在手册中,与我的试剂盒来了。为什么?
光学密度受影响
1. Do I have to run all of my standards and samples in duplicate?
Yes, the duplicates are run in order to monitor assay precision and increase confidence in the assay results obtained.
2. Do I have to run all of my samples at one time?
No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.
3. What types of reproducible results are obtained with the assays?
Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
4. Is it possible to store the reagents other than indicated?
Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.
5. How should I store my samples?
Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.
6. Can I modify the protocol?
BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate and wrong results.
7. Can I use a sample type that is not recommended in the kit insert?
The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.
8. My samples generated values that were outside the dynamic range of the assay. Can I use these values?
It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted and the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【可乐宁检测试剂盒】
9. Do I have to run a Blank or Zero Standards every time?
Yes, these are required for the calculations, and reflect any subtle but significant performance changes from day to day and assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.
10. Can I alter the volume of sample I use in the assay?
It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes
11. Can components from different kits be used?
Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.
12. My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?
The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.
13. How do you recommend I wash my plate?
If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, and that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated and the plate tapped dry on lint-free paper.
14. Do I need to use a plate shaker?
Reliable results can be obtained without a plate shaker, but the O.D.'s will generally be lower than those obtained using a plate shaker.
15. Why do I have to use wavelength correction between 450-570nm?
For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp and optical fluctuations. 【可乐宁检测试剂盒】
16. If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?
The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification and concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.
17. What is the expected concentration of analyte that I should expect to find?
The amount of a given analyte may vary not only from species-to-species, but also between tissue and cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.
18. My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?
The optical density is affected by a number of physical conditions such as time and temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.
19. What are the reasons for High Background?
1) Improper Washing: Check volume of washing buffer reservoir and make sure all recommended washing steps are performed.
2) Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【可乐宁检测试剂盒】
3) Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.
4) Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times and temperatures. However, if all wells are intensely and equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.
9013266 Cover, screw, cool/heat. (10) CNY
9013192 Tubing, base outlet, auto vac, BR8000 CNY
9011756 Heat Transfer Adapter, Microplate RB Adapter for accommodating a 96-well microplate RB on the cooling and heating system or the cooling system; used for both cooling and heating CNY
9011708 Cable, LSB to AC, BR8000 CNY
132738 NeXtal Stock Dioxane (200) 100% v/v Dioxane - 200mL (20 x 10 ml tube) CNY
132600 NeXtal Stock Potassium sodium tar. (50) 1.5M Potassium sodium tartrate tetrahydrate - 50mL (4 x 12,5 ml tube) CNY
800343 Cosmid End-Sequencing, w/o prep CNY
133294 NeXtalStock Zinc chloride 200) CNY
133288 NeXtalStock TRIS-HCl pH 8.4 (200) CNY
1013335 Ni-NTA HisSorb 384 Plates, black (100) CNY
997008 Reagent Cartridge Holder (2) CNY
997004 8-Rod Covers (144) CNY
994900 Filter-Tips and Holders, EZ1 50 Disposable Filter-Tips, 50 Disposable Tip Holders; additional tips and holders for use with BioRobot EZ1 Kits CNY
674891 ipsogen TCF3-PBX1 Standards CNY 【可乐宁检测试剂盒】
674391 ipsogen Beta-Globine Control Gene Stds CNY
337830 qBiomarker SYBR Fluor Mastermix (2) CNY
337633 qBiomarker SYBR Green ROX Mastermix (24) CNY
9018925 Adapter, 33x1.5ml, Tapered-Base Tubes CNY
9018906 36-Well Rotor Locking Ring CNY
9018562 Board, power branching, EZ1a CNY
9013102 BGR Arm P7x82 Redesign (7186) CNY
672591 ipsogen RARA-PML bcr1&2 Standards CNY
672391 ipsogen PML-RARA bcr3 Standards CNY
670513 ipsogen BCR-ABL1 Mbcr (GUS) Kit (24) CNY
619024 careBrush, CE CNY
389002 Investigator IDproof Single Key CNY
9001515 PyroMark Q24 MDx Vacuum Workstation For preparation of single stranded DNA template ready for sequencing by PyroMark Q24.(220V) CE-marked. CNY
9001512 HC2 Equipment Package (non-US) CNY
9001340 AUTOPURE LS CNY
4868004 pg FMDV RT-PCR ASSAY CNY 【可乐宁检测试剂盒】
4872004 PG AIV-H5 RT-PCR Kit (48) Z CNY
4846014 careUU PCR ASSAY CNY
4559065 artus C.trachomatisPlus LC PCR Kit(96)CE CNY
QY-AB1177 DiI细胞膜红色荧光探针 10mg
QY-AB1178 DiO细胞膜绿色荧光探针 10mg
QY-AB1179 ER-TrackerRed内质网红色荧光探针试剂盒 20ul
QY-AB1180 Fluo-3AM钙离子荧光探针 20ul
QY-AB1181 Fura-2AM钙离子荧光探针 50ul 【可乐宁检测试剂盒】
QY-AB1182 Golgi-TrackerRed高尔基体红色荧光探针试剂盒 1mg
QY-AB1183 Lyso-TrackerRed溶酶体红色荧光探针 50ul
QY-AB1184 Mito-TrackerGreen线粒体绿色荧光探针 50ug
QY-AB1185 MQAE氯离子荧光探针 20mg
QY-AB1186 Tubulin-TrackerRed微管红色荧光探针 40ul
QY-AB1187 Dihydroethidium超氧化物阴离子荧光探针 5mg
QY-AB1188 一氧化氮合成酶检测试剂盒 100次
NG0001 超氧化物歧化酶测试盒/SOD测试盒 50管/48样 测总SOD,羟胺法
NG0002 超氧化物歧化酶分型测试盒/SOD分型测试盒 50管/24样 测分型SODCu-Zn、Mn、总,羟胺法
NG0003 谷氨酰胺测试盒 50管/48样 比色法
NG0004 谷氨酸测试盒 50管/48样 比色法
NG0005 高铁血红蛋白测试盒/MetHb测试盒 50T/48样 比色法
NG0006 丙酮酸激酶测试盒/PK测试盒 50管/48样 比色法
NG0007 己糖激酶测试盒/HK测试盒 30管/28样 比色法
NG0008 醛缩酶测试盒/ALD测试盒 50管/24样 比色法
NG0009 乙酰胆碱转移酶测试盒/CHAT测试盒 40管/20样 比色法 【可乐宁检测试剂盒】
NG0010 胃蛋白酶测试盒 50管/24样 比色法
NG0011 胰蛋白酶测试盒 25管/24样 比色法
NG0012 二糖酶测试盒 50管/24样 比色法
NG0013 红细胞NADH高铁血红蛋白还原酶测试盒 50管/48样 比色法
NG0014 丙二醛测试盒/MDA测试盒 50管/48样 TBA法
NG0015 黄嘌呤氧化酶测试盒/XOD测试盒 50管/48样 比色法
NG0016 总抗氧化能力测试盒/T-AOC测试盒 50管/25样 比色法
NG0017 羟自由基测试盒 50管/48样 比色法
NG0018 抑制与产生超氧阴离子自由基测试盒/O2-测试盒 50管/48样 比色法
NG0019 髓过氧化物酶测试盒/MPO测试盒 100管/48样 比色法
NG0020 过氧化氢酶测试盒紫外分光光度法/CAT测试盒紫外分光光度法 100管/96样 紫外比色法
NG0021 过氧化氢酶测试盒可见光分光光度法/CAT测试盒可见光分光光度法 100管/96样 钼酸铵法
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:齐一生物科技(上海)有限公司发布并且负责版权等法律责任。
易推广客服微信