百达翡丽修理【中国区售后维修(PATEK PHILIPPE)】北京上海广州深圳

百达翡丽修理【中国区售后维修(PATEK PHILIPPE)】北京上海广州深圳名表维修连锁电话：400-875-1181/400-677-0155全国百家连锁维修领导品牌，百达翡丽修理【中国区售后维修(PATEK PHILIPPE)】北京上海广州深圳 服务地区：北京、上海、天津、广州、深圳、杭州、南京、沈阳、太原、成都、武汉、南昌、西安、南宁、郑州、昆明、苏州 等地区，形成了庞大的腕表售后维修服务网络，为广大消费者提供方便、快捷的手表维修服务，百达翡丽修理【中国区售后维修(PATEK PHILIPPE)】北京上海广州深圳 专业的维修技术、透明 的维修价格、立等可取的维修效率网上电话预约可享受9折优惠，百达翡丽修理【中国区售后维修(PATEK PHILIPPE)】北京上海广州深圳 到店修表立等可取，流程透明，价格公开。

---

---

　　华东地区维修服务热线：4006807911

　　济南(山东店)：济南市历下区泉城路180号齐鲁国际大厦B座10层1005室

　　南京(江苏店)：南京市秦淮区汉中路1号南京国际金融中心10楼H室

　　合肥(安徽店): 合肥市蜀山区长江西路189号合肥之心城环球中心A座20层09室

　　杭州(杭州店)：杭州市下城区环城北路208号杭州大厦C座坤和中心30层06室

　　上海(上海店)：上海市黄浦区南京东路409-459号上海置地广场9楼918室

　　厦门(福建店)：厦门市思明区鹭江道8号厦门国际银行大厦24层C单元

　　华南地区维修服务热线：4008092655

　　广州(广州店)：广州市天河区体育西路103号维多利广场写字楼A座2605室

　　深圳(深圳店)：深圳市罗湖区深南东路5002号地王大厦写字楼25层2510室

　　南宁(广西店)：南宁市青秀区金湖北路59号地王大厦12楼

　　华中地区维修服务热线：4006807911

　　武汉(湖北店)：武汉市汉江区中山大道818号平安大厦22层11室

　　郑州(河南店)：郑州市金水区花园路39号国贸中心招银大厦14层1406室

　　南昌(江西店)：南昌市东湖区胜利路步行街32号裕泰福珠宝二层

　　华北地区维修服务热线：4008092655

　　北京(北京店)：北京市西城区西单北大街甲131号西单大悦城写字楼7楼702室

　　天津(天津店)：天津市和平区南京路219号天津中心写字楼9楼903室

　　太原(山西店)：山西省太原市迎泽区解放路3号亨得利钟表眼镜店三层

　　西南地区维修服务热线：4008751181

　　成都(四川店)：成都市锦江区东御街18号天府广场百扬大厦21层2107室

　　东北地区维修服务热线：4006770155

　　沈阳(辽宁店)：沈阳市和平区中华路69-1号富丽华国际商务中心9楼903室

　　哈尔滨(黑龙江店)：哈尔滨市南岗区东大直街146号上和置地广场金座12楼1214室

【百达翡丽修理【中国区售后维修(PATEK PHILIPPE)】北京上海广州深圳】

　　名表还需要定期保养吗?答案是肯定的。

　　首先我们从手表结构上讲，为什么名表需要定期保养。

　　一、手表密封问题。大多数名表都注明是防水的，如30M、50M、100M等等。也有一部分注明是不防水的。由于结构上的需要，有的防水有的不防水，并不是说不防水的手表就不是好表，市场上很多十几元的塑料表也能防水，难道它能算是名表吗?另外，就是注明是防水的手表，也是指生产出来时经过检验是防水，但不能保证您不保养使用一辈子都防水。比如许多买了表的顾客戴着表沐浴，偶尔一两次感觉没有进水，但后几次就发现进水了，进了水也不及时处理，时间一长里面开始生锈，去商店告商品质量不好，要退货。另一方面，任何手表都不能戴着去洗桑拿浴和热水澡，因为垫胶冷缩后，热空气进入密封囊中，不能出来，造成雾气也不及时处理，造成腐蚀、生锈，所以手表手表只能在正常情况下佩带。其实手表防水主要靠很小的几个橡胶圈起作用，时间一长橡胶圈就会老化，失去弹性后就有缝隙，就可能导致进水，进气，所以要定期更换密封橡胶圈才能保证手表防水。

　　二、机械运作问题。名表一般都是机械手表，是机械手表就都靠齿轮运作，我们看到手表上会标明多少钻的手表，这个多少钻并不是说手表有多少钻石，而是说明手表有多少个齿轮轴是用钻眼的，一般都用人造钻石代替，由于人造钻石耐磨损，所以表的钻眼越多，手表相对走时寿命长一点。但是手表的齿轮不可能用钻石这样硬的物料来加工，它只能用钢料来作为轮轴，手表越小越簿，轮轴越细，每天几万转的转数完全靠在钻眼里面微量的油来降低磨损，一旦油干了，轮轴处于干磨损，几年下来，这个表的寿命也就到了，尽管名表的表油都是非常高档的，但是由于量太小，几年下来肯定会挥发完，一根象头发一样细的轮轴能磨损多长时间?以前的表结构没有现在的复杂，且做的比较大，轮轴也比较粗，所以有的顾客说我的表十年没有保养也在走，现在的表越做越小，价格比以前贵几十倍，不能抱不如以前的感慨。

　　三、外观保养。名表外观一般用K金、K白金，高级动物皮料。K金尽管主要原料是黄金，但人手上的汗是酸性加上空气的腐蚀，时间一长就远没有新的时候漂亮，这就需要经常清洗抛光，使名表保持长新。如果是K白金，时间一长外面银白层磨损，里面黄金暴露，就没有以前那么白，所以也需要定期保养镀白，才能保养长新。皮表带就更不用说了，汗渍的腐蚀会使皮带过早硬化开裂，正常保养应该避免多汗多雨时期戴皮带表。如果手表是用钢做壳带，经常打磨翻新，更能体现其价值。

　　所以对于名表来说，保养的好坏，将会对其价值有着直接的影响。

　　watches also need regular maintenance? The answer is yes.

　　first we watch from a structural perspective, why need regular maintenance of watches.

　　one, watch sealing problem. Most watches are marked is waterproof, such as 30M, 50M, 100M ａnd so on. There is also a part of the note is not waterproof. Due to the structure, some have not waterproof waterproof, ａnd it＇s not waterproof watch is not a good table, on the market a lot of ten yuan plastic table can be waterproof, can it be watch? In addition, is marked is waterproof watches, but also refers to the production out after inspection is waterproof, but we can not guarantee that you do not use a lifetime of waterproof maintenance. For example, many customers buy Piaget wearing a table one or two bath, occasionally feel no water, but after a few times found water, into the water is not handled in a timely manner, a long time to go to the store to rust, product quality is not good, want to return. On the other hand, any watch can＇t wear to the sauna ａnd hot bath, because cold pad, hot air into the sealed bag, not out of smog nor timely treatment, resulting in corrosion ａnd rust, so only wear watches under normal conditions. In fact, watch waterproof mainly rely on the small role of several rubber ring, rubber ring for a long time will be aging, loss of elasticity after a gap, it may lead to water intake, so the sealing rubber ring to ensure the regular replacement of waterproof watches.

　　two, the problem of mechanical operation. Watches are generally mechanical watches, mechanical watches are on the gear operation, we see how many watches will be marked on the drill watch, this is not to say how much the drill watch how many diamonds, but that the number of watch gear shaft is used in drilling, generally used instead of artificial diamond, because of man-made diamond abrasion so the table, drilling more, relatively long life a little time watch. But watch gear can not use such diamond hard materials processing, it can only be used as a steel wheel, watch more small book, the axle is fine, every day tens of thousands of revolutions in turn relies entirely on drilling trace inside oil to reduce wear, once the oil is dry, dry grinding wheel is damaged, a few this year, the life table also arrived, although the watch table oil are very high-end, but because the amount is too small, will finish a few years down like hair thin shaft can wear long? Table structure in the past did not now ａnd do more complex. The axle is relatively thick, so, some customers say my watch is ten years without maintenance on the table, now get smaller, the price several times more expensive than before, can＇t hold the feeling as before.

　　three, appearance maintenance. Watch the general appearance with gold, K gold, senior animal leather. Although gold is the main raw material of gold, but the hands sweat is acidic ａnd corrosion of the air for a long time, it is far from new beautiful, which requires frequent cleaning ａnd polishing, to keep watch changxin. If it is K platinum, a long time outside the silver layer wear, which is not previously exposed to gold, so white, so also need regular maintenance of plating white, can maintain changxin. Leather Watchband is needless to say, sweat corrosion can cause premature hardening of belt cracking, normal maintenance should avoid sweating the wet period wear belt table. If the watch is made of steel shell with, often polished renovation, more can reflect its value.

　　So for

　　watches, maintenance quality will have a direct impact on its value.