您的位置:首页 > 产品展厅 > 仪器仪表 > 专用仪器仪表 > 其他专用仪器仪表 > 南澳电气专业生产NAJS全自动极速多台位互感器检定装置
NAJS automatic flash speed multi-station transformer calibration device
产品别名
NAJS全自动极速多台位互感器检定装置,极速多台位互感器检定装置,全自动多台位互感器检定,多台位互感器测试仪,全自动极速多台位互感器校验装置
产品概述
NAJS全自动极速多台位互感器检定装置,是南澳电气公司为适应现代互感器校验的快速、准确的特点而开发的新一代互感器检定装置。该装置由NAJS全自动极速多台位互感器检定装置、电流负载箱、控制柜、电流互感器专用测试台等几个部分组成。在保持原技术特点的前提下,在电流互感器的快速测量、测试点的快速定位、以及负荷箱、各种变比的互感器覆盖等方面有了非常大的提高。
产品特点
(1) 该装置细调节采用了程控源技术,使测试点的定位更加快速、准确。
(2) 该装置在多只电流互感器测量速度方面有了质的提高,在3-5分钟的时间里可测量十二只任何变比的电流互感器。
(3) 该装置配置了5A的标准电流互感器,电流负荷箱配置了5A负载值2.5VA-60VA,电压负载箱 配置了100V负载值从1.25VA-158.75VA基本上可满足用户的要求。负载箱在测量时可进行自动切换。
(4) 该装置可进行互感器的规程和非规程的测量,测量时用户可指定对任何百分点的测量。
技术指标
(1) 环境条件
温度:5℃~40℃
相对湿度:<80%(25℃)
海拨高度:<2500m
电源频率:50Hz±0.5Hz
电源电压:220V±5V
(2) 测量范围:
f:0.0000%~200.0% δ:0.000′~999.9′
R:0.0000Ω~60.0Ω X:0.0000Ω~60.0Ω G:0.0000mS~60.0mS
测量对象:CT、PT、阻抗、导纳。
(3) 基本误差:
同相分量:ΔX=±(X×2%+Y×2%±2个字)
正交分量:ΔY=±(Y×2%+±X×2%×34.38)±5个字
“X”、“Y”——仪器的显示值
“5个字”——仪器的量化误差
百分表:1级
(4) 工作范围:
电流:(1%-149%)In (In=5A)
(5%-149%)In (In=1A)
工作负荷: 电流: To对Tx<0.12W cosφ=1.0
外形尺寸(mm)
横台体:1500(L)×780(W)×1030(H)
竖台体:670(L)×630(W)×1570(H)
Product Description
NAJS automatic flash speed multi-position transformer calibration device, is the South Australian Electric Company to adapt to the modern transformer calibration fast and accurate characteristics of the development of a new generation of transformer calibration device. The device consists of NAJS automatic flash speed multi-position transformer calibration device, the current load box, control cabinet, current transformer test stand and other components. In the premise of maintaining the original technical characteristics of the current transformer in the rapid measurement of the rapid positioning of test points, and the load box, a variety of variable ratio of the transformer cover, etc. have been greatly improved.
Product Features
(1) The fine adjustment of the device uses a programmable source technology, the test point of the positioning more quickly and accurately.
(2) the device in a number of current transformer measurement speed has been a qualitative improvement in the 3-5 minutes of time can be measured in any of the twelve transformers than any current transformer.
(3) The device is equipped with 5A standard current transformer, the current load box configuration 5A load value of 2.5VA-60VA, the voltage load box configuration 100V load value from 1.25VA-158.75VA basically meet the requirements of users. The load box can be switched automatically during measurement.
(4) The device can be used for the regulation of the transformer and non-regulation of the measurement, the user can specify the measurement of any percentage of the measurement.
Technical indicators
(1) environmental conditions
Temperature: 5 ° C to 40 ° C
Relative humidity: <80% (25 ℃)
Altitude: <2500m
Power frequency: 50Hz ± 0.5Hz
Power supply voltage: 220V ± 5V
(2) Measuring range:
F: 0.0000% to 200.0% δ: 0.000 'to 999.9'
R: 0.0000? To 60.0? X: 0.0000? To 60.0? G: 0.0000 mS to 60.0 mS
Measurement objects: CT, PT, impedance, admittance.
(3) the basic error:
In-phase component: ΔX = ± (X × 2% + Y × 2% ± 2 words)
Quadrature component: ΔY = ± (Y × 2% + ± X × 2% × 34.38) ± 5 words
"X", "Y" - the displayed value of the instrument
"5 words" - quantization error of the instrument
Dial indicator: Level 1
(4) Scope of work:
Current: (1% -149%) In (In = 5A)
(5% -149%) In (In = 1A)
Workload: Current: To for Tx <0.12? Cos? = 1.0
(5) Dimensions (mm)
Horizontal table body: 1500 (L) × 780 (W) × 1030 (H)
Vertical platform body: 670 (L) × 630 (W) × 1570 (H)
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:南澳电气(武汉)有限公司发布并且负责版权等法律责任。
易推广客服微信