美国SCHOTT冷光源

上海锡明光电代理|美国SCHOTT|的冷光源|DCRIII|，|DCRIV 系列|及|megelight100系列光源|。关键词：SCHOTT，DCRIII冷光源，DCRIV，megalight100. CV系列A20500 Download Sales Sheet ACE? Light SourceStandard Features1. Solid state dimmer for continuous control zero to full intensity.2. Heavy duty, grounded metal housing.3. 115 or 230 input voltage versions available.4. IR interference filter for cool illumination.5. Full illumination on .60" active diameter input6. Interchangeable Modulamp? Units offer 2 positions to maximize individual lamp efficiencies.7. Choice of three, 150 watt halogen lamps - EJA, EKE, ａnd DDL for intense, uniform illumination. A20560 Standard Features1. Heavy duty, grounded metal housing.2. 115 or 230 input voltage versions available.3. IR interference filter for cool illumination.4. Full illumination on .60” active diameter input.5. Solid state dimmer control.6. Interchangeable Modulamp? Units offer 2 positions to maximize individual lamp efficiencies.7. Choice of three, 150 watt halogen lamps - EJA, EKE, ａnd DDL for intense, uniform illumination.8. Built-in thermal shut down. A20800 Download Sales Sheet DCR? III Light Source DC regulated light source provides intense, cool illumination.Standard Features1. DC-regulated light source limits light fluctuation to ± 0.5% due to line voltagevariation.2. Universal input voltage – accepts 90 to 265 VAC.3. Current limiting – protects the unit from over heating due to defective andaging bulbs.4. Transient protection – allows remote location of bulb.5. Lamp change indicator light – LED located on front panel changes fromgreen to red when lamp should be replaced. This is due to either an open or partially shorted filament.6. Soft start “lamp saver” circuitry.7. IR interference filter for cool illumination.8. Solid state dimmer control for continuous dimming.9. Interchangeable Modulamp? Units offer 2 lamp positions to maximize individual lamp efficiencies.10. Choice of three, 150 watt halogen lamps - EJA, EKE ａnd DDL for intense, uniform illumination.11. Can power the RS232 from the 9-pin connector. A20870 Download Sales Sheet Standard Features1. DC-regulated light source limits light fluctuation to ± 0.5% due to line voltagevariation.2. Universal input voltage – accepts 90 to 265 VAC.3. Current limiting – protects the unit from over heating due to defective ａnd aging bulbs.4. Transient protection – allows remote location of bulb.5. Lamp change indicator light – LED located on front panel changes from green to red when lamp should be replaced. This is due to either an open or partially shorted filament.6. Soft start “lamp saver” circuitry.7. IR interference filter for cool illumination.8. Solid state dimmer control for continuous dimming.9. Interchangeable Modulamp? Units offer 2 lamp positions to maximize individual lamp efficiencies. A20890 Download Sales SheetDCR? IV Light Source DC regulated light source with integrated Equalizer? light feedback to providestabilized light output for the most demanding machine vision inspection applications. （See DCR? III Plus datasheet for base description.）Benefits1. Stable lamp output over the life of the lamp ａnd minimized lamp to lamp variation.2. Remote controllable using integrated RS232 interface.Standard Features1. Flexible - Two configurations available:A. DCR? IV used with a reference Modulamp? unit ａnd off-the-shelf fiberoptics, maintains DDL lamp output a±2% over the life of the lamp ａnd ±8% lamp to lamp.B. For even greater control, use the DCR? IV with fiber optic products that have an integrated reference bundle; special order only. This will maintain DDL lamp output ａnd lamp to lamp variation within ±1%.2. All of the features of the DCR? III Plus Light Source including control of up to three additional DCR? III light sources via an expansion cable.3. LED’s located on the front panel indicate that the lamp intensity is stabilized.4. Easy to use front panel controls for calibration ａnd intensity control.5. CSA certified to UL, CE compliant to low voltage ａnd EMC directives.6. Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz. A20900 Standard Features1. Color temperature of 6000K.2. Twice the light output of DDL lamps.3. Bulb lifetime of 3500 hours average at 50W output.4. Metal halide lamp specifically designed with highest uniformity.5. Solid state dimmer control.6. Heavy duty, grounded metal housing.7. Universal input voltage - accepts 90 to 265 VAC.8. IR interference filter for cool illumination.9. Full illumination on .50” active diameter input.17. Detachable IEC cord.18. CSA approved to UL spec, CE compliant. Mega 100 冷光源 Download Sales Sheet 灯： 100W卤素灯灯寿命： 1000小时（平均）照明强度： 650，000Lux灯电压安定： Within +/-0.1%（Input Voltage Fluctuation +/-10%）耗电量： 150W（350VA）彩色过滤器： 一个容易可安装的彩色过滤器（可选择）外部尺寸： 120H 76W2350Dmm彩色温度： 3100K重量： 1.5KG