上海汇分科技有限公司专业销售 Santotrac 牵引油系列

santotrac traction lubricants

fluid lubricants that solidify during use can enhance the power output of traction drives while extending their useful lives. these lubricants extend the life of industrial gearless planetroll type systems and are the choice lubricants for the new generation automotive transmission systems where continuously variable transmission (cvt) are used.

santotrac products

traction lubricants are synthetic hydrocarbon fluids that become solid under high stress and high shear. they are liquid beyond the contact area, which makes them useful in traction type drives.  these products have high coefficient of traction (ratio of transmitted force to contact force) and molecular stability to resists high shear, high speeds, and pressures, while maintaining the integrity of the film between the stressed metal surfaces.  santotrac lubricants undergo unusually high transitory viscosity-increase under high pressures.  it has been demonstrated that contact pressures of 700,000 psi have not succeeded in destroying the integrity of the film between metal-to-metal rolling surfaces.  santotrac lubricants are produced in a range of viscosity grades, wide enough to enable the user to se-lect the most suitable viscosity for a particular operating condition and application.  all grades offer stability at high temperature, high coefficient of traction and good lubricating performance.

some of the specific products produced and sold today are as follows: 

1. santotrac 32 traction lubricant

santotrac 32 is a low viscosity industrial traction lubricant. it has high traction coefficient and is thermally stable.

2. santotrac 50 traction lubricant

santotrac 50 is an industry standard for variable speed, gearless drive systems. it has been used in hundreds of applications worldwide over the past 25 years. santotrac 50 is used in industrial, automotive and aerospace applications, where it provides excellent power transmission at very high speeds. this specially designed lubricant has exceptional heat and oxidative stability and will significantly improve equipment performance and  service life. santotrac is a non-toxic, environmentally friendly product that has the highest coefficient of traction of any lubricant known to date.  it provides the best balance of properties for most uses:  medium viscosity, good anti-wear lubrication in sliding contact, good rust protection, negligible foaming and high traction properties.

3. santotrac 2000 and 3000 series traction lubricants

this series of lubricants are designed to meet the current and future needs of continuously and infinitely variable speed transmissions(cvt and ivt) that are being tested on many of the automotive powertrain systems under development today.

4. santotrac traction greases

santotrac greases are high traction, high temperature greases with excellent thermal and mechanical stability. these greases are recommended for applications requiring operation at low and high temperatures where a high coefficient of traction is necessary, and where the lubricant must maintain high elastohydrodynamic (ehd) film thickness.  these greases enhance the rolling contact performance of bearings and extend fatigue life.

5. santotrac mcs-2080a  aircraft traction lubricant

this traction lubricant was developed to meet the demanding requirements of today"s aircraft around the world.  it is a low viscosity thermally stable lubricant with good low temperature capability.  it is compatible with all aircraft transmission components.

6. custom traction lubricants

santotrac would be pleased to develop a traction lubricant to meet the requirements of your specific application or any new equipment design that you are contemplating for the future.