您的位置：首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 其他类型钳工工具 > 日本思达扭力工具
| Management of air tool / oil pulse tool |
| 仠Torque Tester 丂DI-4B-25 |
 丂丂丂 |
| For Daily Torque measurement of a small impact Tool, Air screw DriversHigh Torque Electric drivers DI-4B-25 - Up to MAX. 25 N.m (250 kgf.cm) - With Blow Counter for Impact Tools. - High Luminous LED Display for high visibility in dark place |
| Specification | DI-4B-25 | |||
| Measuring range | 0.30乣25 N 丂3.0乣250 kgf丒cm丂3.0乣220 lbf丒in | |||
| Operative Measuring Range at P-D Mode | 0.70 - 25 N.m 丂丂7.0 - 250 kgf.cm丂丂7.0 - 220 lbf.in | |||
| Accuracy | 亇 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | |||
| Display | Torque Meter | LED Digital Display, 4 digits | ||
| Blow Counter | LED Digital Display, 2 digits (Displayed only in P-P mode) | |||
| Measureing Direction | CW, CCW selectable with a Switch | |||
| M''ment Mode | P-P Peak | Holding Peak Load Value | ||
| T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | |||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||
| Blow Counter | Count Range | Zero to 99 blow | ||
| Count Time | 0.1 - 9.9 seconds | |||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button | |||
| Data output | Serial Interface RS232C (Baud rate: 9600) | |||
| Power Supply | Battery | Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh) | ||
| Automatic PW off | Automatically power off after 5 minutes left without operation | |||
| Charging time | Within 6 hours | |||
| Continunous working time | 8 hours | |||
| Battery Life Time | Chargeable more than 300 times | |||
| Weight | 2.1kg | |||
| Dimension | 150(W) x220(D) x74 (H) | |||
| Accessories (one piece each) | Bit Socket ( 6.35 HEX - Subtense 17mm ) | |||
| Measuring Joint : Hard Type (M10) & Soft Type (M10) | ||||
| Socket for Wrenches ( Subtense 17mm ) | ||||
| Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output | ||||
| Exclusive receipt case | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Attachment丂About the method of application of an attachment | |
 | Soft joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 3 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For elastic body. |
 | Hard joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 1/10 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For hard body. |
苏州伟创精密仪器是一家仪器，仪表，量具，工具的大型代理商，主要销售产品如下：
1、 日本TOHNICHI （东日）扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪
2、 日本CEDAR思达数显扭力扳手、扭力起子、电动工具扭力检测仪、气动工具扭力检测仪
3、 日本AIKOH （爱光）指针、数显式推拉力计、按键测试仪、弹簧拉压力测试台
4、 日本SHIMPO （电产）推拉力计、测试台、张力计、频闪仪,转速表
5、 日本PEAK （东海）放大镜，刻度放大镜,带灯放大镜,笔式放大镜,百倍镜,头盔镜,圆筒放大镜
6、 日本MITUTOYO （三丰）测量工具，数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计
7、 日本JPG 精密塞规、环规, 日本EIESN艾森 精密针规、 美国MEYER英制针规 日本ISSOKU精密塞规，环规
8、日本TELOCK （得乐）橡胶硬度计、测厚规、深度表
9、日本FUJITOOL （富士）半径规、角度尺
10、瑞士SYLVAC 数显百分表、千分表
11、日本TOKYO SEIKI （精机株式会社）横向张力计及纺织专用张力计
12、日本YOKOGAWA（横河）线速计、UR1800工业记录仪,DR230记录仪
13、日本SATO （佐腾）温湿度记录仪，红外线测温仪.电子表面温度计
14、日本ANRITSU 表面温度计，温度测头
15、台湾TES噪音计，温度计
16、日本URYU（瓜生）气动工具系列
17、日本YOKOGAWA横河铜线,漆包线专用张力计
18、日本KETT凯特膜厚计涂层测厚仪
19、美国Hyprez喜百事研磨膏，润滑油
20、瑞士TETKO网板张力计
21、日本ISUZU东京温湿度记录仪
22、瑞士CORREX确力士横向张力计
23、日本OTSUKA大冢台式放大镜
24、日本SUCCESS成功牌指针式推拉力计
25、日本Digitech迪吉特数显推拉力计，推拉力测试台
26、日本JEIC/ACO震动计，噪音计
① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内
使用，并注明"来源：易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源：xxx（非本网）"的作品，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ，必须保留本网注明的"稿件来源"，并自负版权等法律责任。
③ 如涉及作品内容、版权等问题，请在作品发表之日起两周内与本网联系，否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布，信息内容真实性、准确性与合法性由相关企业负责，易推广对此不承担任何责任，如遇非法或侵权信息欢迎监督，请联系QQ：1273397930或者发邮件至：1273397930@qq.com，如有确实证件证明属实，本站将对其删除处理，谢谢！
⑤ 本信息由注册会员：苏州伟创精密仪器有限公司发布并且负责版权等法律责任。
易推广客服微信
