日本思达电批扭力测试工具

价格：电议
型号：CD-10M
生产地：日本
访问：554次
发布日期：2009/11/2(更新日期：2012/1/12)

苏州伟创精密仪器有限公司

提示：如果您未采购满意的产品，请在网页头部搜索更优质的产品

在线咨询进入厂商展台通过微信查看供应商电话

产品展示

见详细说明

详细内容
公司简介

Management of electric screw driver

仠Torque Meter 丂CD-100M/10M

upgrade丂The main changed parts

(1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display.
(2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc.
(3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily.
(4) Calculation of Maximum, Minimum,Average Became Intelligible.
(5) The call of the saved data became easy. The output of data also became intelligible.
(6) Fault charge protection. It is pilot-lamp lighting during charge.
(7) Data Output is USB Form (B Type).
(8) Memory Data are 800 Affairs
(9) Real-time Output is Every 1 / 180 Seconds.

Specification	CD亅100M	CD亅10M
Measuring range (at the time of Track)	0.10乣10丂N丒m	1.0乣100丂們N丒m丂
	1.0乣100 kgf丒cm	0.10乣10 kgf丒cm
	1.0乣90 lbf丒in	0.10乣9 lbf丒in
Accuracy	亇0.5亾乮F/S乯(199 or less digit亇1digit)
Display	The 3.5 figures digital display of LCD
The measurement direction	CW-CCW (rightleft)
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
Highlow limits judging function	Highlow value are measurement within the limits,can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum,the average value display	The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels.
Automatic Clearance	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero	A clear button is pushedit is a zero.丂 Data is outputed.
Data output	ASCII format (baud rate 19200)
Power supply	Ni-Cd chargeable battery 1.2V亊5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	仩 20mm/ 仩9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160乮W乯亊125乮D乯亊55乮H乯
Attachment	Measurement joint丂SJ50/SJ10K	Measurement joint丂SJ10
Accessories (one piece each)	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, traceability system figure

SJ50	SJ10	About an adapter 亙measurement joint丂SJ乮PAT.P乯亜
		It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort.

产品留言

公司同类产品

版权说明

① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内

使用，并注明"来源：易推广"。违者本网将追究相关法律责任。

② 本网凡注明"来源：xxx（非本网）"的作品，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，且不承担此类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用，必须保留本网注明的"稿件来源"，并自负版权等法律责任。

③ 如涉及作品内容、版权等问题，请在作品发表之日起两周内与本网联系，否则视为放弃相关权利。

④易推广页面显示产品信息均由企业自主发布，信息内容真实性、准确性与合法性由相关企业负责，易推广对此不承担任何责任，如遇非法或侵权信息欢迎监督，请联系QQ：1273397930或者发邮件至：1273397930@qq.com，如有确实证件证明属实，本站将对其删除处理，谢谢！

⑤ 本信息由注册会员：苏州伟创精密仪器有限公司发布并且负责版权等法律责任。

相关分类

相关标签

您最近阅读过的产品

产品展示

日本思达电批扭力测试工具

苏州伟创精密仪器有限公司

产品展示

您可能感兴趣

产品留言

公司同类产品

版权说明