日本思达（CEDAR）扭力测试仪

价格：电议
型号：DIS-IPS20C
生产地：日本
访问：377次
发布日期：2009/11/2(更新日期：2012/1/12)

苏州伟创精密仪器有限公司

提示：如果您未采购满意的产品，请在网页头部搜索更优质的产品

在线咨询进入厂商展台通过微信查看供应商电话

产品展示

见详细说明

详细内容
公司简介

Measurement of bolting machines

仠 TORQUE TESTER 丂DIS-IPS

Performance check of an electric driver
Management of the bolting torque of an automatic line

A new function is carried
(1) Display Board Became Legible.
丂(A Measurement modea unit. Other coded data is丂displayed.)
(2) Fault charge protection loading. It is pilot-lamp lighting during charge.

Detection part is very a compact!
The best for measurement of an automatic line
OW join. it rewinds atis needlessness.

Disply screen became large. It is very legible .It became large 1.5times.
Various attachments are attached. Measurement is possible,with a bit attached.

The main features
仩 Yes-no decision丂
仩 Average calculation
仩 Data storage is 800 affairs.
仩 A convenient functional setup of a setup of a measurement start value etc.
仩 Data output at real time (every about 1/180 seconds).丂
仩 USB terminal data output

DIS-IPS
Specification		DIS-IPS20C	DIS-IPS5C
Measuring range		0.20乣20 N 丂丂2.0乣200 kgf丒cm丂丂 2.0乣180 lbf丒in	0.020乣5 N?/span>m 0.20乣50 kgf丒cm 0.20乣45 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword.
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance		Easy Zero-Adjustment with pressing CLEAR button
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - about 3hours
Continunous working time		12 hours
Attachment fit mouth		仩20倣m丂
Meter outside type dimension		100乮W乯亊105乮D乯亊33乮俫乯
Weight		Meter part 520g
Attachment		Fixed Attachment丂仩20噊丂M4/M5/M6/M8
		OW joint丂OW-20	OW joint丂OW-10
Accessories (one piece each)		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, a traceability system figure

OW joint is a measurement end at one-touch.
It binds tightmeasurement is completed only by the work of a direction. Inversion operation like the former is unnecessary.Since the fit part with a bit is the screw head, where a bit is attached, it can be measured.By the conventional method, friction of a screw part had affected the measurement result.This joint has the structure where it is not influenced of fricative,can manage torque stabilized over the long period of time

产品留言

公司同类产品

版权说明

① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内

使用，并注明"来源：易推广"。违者本网将追究相关法律责任。

② 本网凡注明"来源：xxx（非本网）"的作品，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，且不承担此类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用，必须保留本网注明的"稿件来源"，并自负版权等法律责任。

③ 如涉及作品内容、版权等问题，请在作品发表之日起两周内与本网联系，否则视为放弃相关权利。

④易推广页面显示产品信息均由企业自主发布，信息内容真实性、准确性与合法性由相关企业负责，易推广对此不承担任何责任，如遇非法或侵权信息欢迎监督，请联系QQ：1273397930或者发邮件至：1273397930@qq.com，如有确实证件证明属实，本站将对其删除处理，谢谢！

⑤ 本信息由注册会员：苏州伟创精密仪器有限公司发布并且负责版权等法律责任。

相关分类

相关标签

您最近阅读过的产品

产品展示

日本思达（CEDAR）扭力测试仪

苏州伟创精密仪器有限公司

产品展示

您可能感兴趣

产品留言

公司同类产品

版权说明