您的位置：首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 其他类型钳工工具 > 螺丝扭力仪
| Screw Counter | |
| 仠 Scorew Counter 丂ECT series | |
| The number of screw bolting is setit checks whether a worker forget to tighten a screw! | |
| ECT-02 Low pricea short form | |
 | The signal from an electric driver is counted. The bolting end signal from an electric driver is counted certainly. A check is easy with soundlight. A number check can be checked with a LCD display machinebuzzer sound. It is a malfunction check by the timer function. A screw can gnaw, idling detection can be performedonly normal screw bundle operation can be counted. Count cancellation function After the torque rise, if reverse rotation operation is performed immediately, the function in which the one number of counts returns is attached. (When the reverse signal is outputted from the driver) |
| ECT-03 丂Work丂sensor correspondence | |
 | The signal from an electric driver is counted.A check is easy with soundlight.It is a malfunction check by the timer function. Further Reliable management is possible at a work sensor function. It will become an error, if a work is removed before attaching the sensor which judges the existence of a workbecoming a bolting number. The apparatus of others [ a bolting completion signal ] is connectable. Since a signal will be outputted if it becomes Work O.K. or Count O.K. You can also use an automatic line. Work set timer function A worker''s safety can be consideredtime until a work is set and fixed to a fixed implement can be set up. Count cancellation function After the torque rise, if reverse rotation operation is performed immediately, the function in which the one number of counts returns is attached. (When the reverse signal is outputted from the driver) |
| ECT-05丂丂Work丂sensor correspondence | |
 | The signal from an electric driver is counted.A check is easy with soundlight.It is a malfunction check by the timer function. Further A brightlegible LED display Large-sized LED (a height of 26mm) is adopted as a display part. The check of a position to a dark place or the left number of counts becomes easy. Work sensor (a change is possible)/Completion signal/ Malfunction prevention function The peripheral equipmentconnection by the variegated function are possible. High-grade management is possible. Count cancellation function After the torque rise, if reverse rotation operation is performed immediately, the function in which the one number of counts returns is attached. (When the reverse signal is outputted from the driver) |
| It corresponds to various models by easy connection. To the electric driver out of which the screw bundle completion signal has come There is also a model which cannot be adapted.Moreover, in part, also when change of a setup is required, it is. Please ask to our company for details. It corresponds also to a torque wrench driver. In the torque wrench torque driver to which the torque rise signal output was attached, ECT-05 correspond with a changeover switch. ECT-02.03 set upcorrespond at the time of shipment. | |
| Specification | ECT-02 | ECT-03 | ECT-05 | ||
| Display | LCD digital display | LED digital display | |||
| The number of setting counts | 1-99 (count subtraction system) | ||||
| Timer setup | LO TIME 0.0 - 2.0 seconds (between [ 0.01-0.09 ] 0.0-0.1) | LO TIME 0.0 - 2.0 seconds | |||
| HI TIME 0.0 - 9.0 seconds | |||||
| Auto clearance | 0.5 - 3.0 seconds (0.5-second interval) | ||||
| Function | Counter,丂Timer setup,丂Count cancellation | ||||
| Yes-no decision | O.K.: Buzzer sound / NG: Buzzer sound,LED red lighting incoming signal | ||||
| Incoming signal | 亅 | Work sensor An open collector or a non-voltage input | Work sensor correspondence a change is possible) An open collector or a non-voltage input | ||
| Output signal | 亅 | A screw bundle O.K. signal/ work O.K. signal Open collector output (Rated 30V.20mA) | O.K. signal A screw bundle NG signal / work NG signal Open collector output(Rated 30V.20mA) | ||
| The contents of an output | 亅 | If a bolting number is become (display 00)a work is removed, you will be told about at "Work O.K." signala buzzer. | If it becomes a bolting number, you will be told about at "Work O.K." signala buzzer. Ais possible, when a work is removedit resets. | ||
| Power supply | AC/DC adaptor DC4.2V | AC 100-120V (240V can be responded) | AC/DC adaptor DC7.5V | ||
| Continuation use time | About 8 hours | - | |||
| Auto-power-off | After the neglect during 90 minutes | - | |||
| Size | 80乮H乯亊75乮W乯亊13乮D乯 | 108乮H乯亊77乮W乯亊40乮D乯 | 126乮H乯亊112乮W乯亊35乮D乯 | ||
| Weight | (Abbreviation)100g | (Abbreviation)280g | (Abbreviation)400g | ||
| Adaptation driver | Nitto Kohki: －－ : by SP specification article Nakamura factory company of DLV7120/7130/7140/8120/8130/8140/8150 | ||||
| Nakamura seisakusyo－－ : by the SWP specification article high male company of 3K-110/120/180//9K-131/130/140/150 | |||||
| HIOS －－ : by the OPC specification article of VZ-1510/1820/3012/4506 | |||||
| Etc. | |||||
 |  |  |
苏州伟创精密仪器是一家仪器，仪表，量具，工具的大型代理商，主要销售产品如下：
1、 日本TOHNICHI （东日）扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪
2、 日本CEDAR思达数显扭力扳手、扭力起子、电动工具扭力检测仪、气动工具扭力检测仪
3、 日本AIKOH （爱光）指针、数显式推拉力计、按键测试仪、弹簧拉压力测试台
4、 日本SHIMPO （电产）推拉力计、测试台、张力计、频闪仪,转速表
5、 日本PEAK （东海）放大镜，刻度放大镜,带灯放大镜,笔式放大镜,百倍镜,头盔镜,圆筒放大镜
6、 日本MITUTOYO （三丰）测量工具，数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计
7、 日本JPG 精密塞规、环规, 日本EIESN艾森 精密针规、 美国MEYER英制针规 日本ISSOKU精密塞规，环规
8、日本TELOCK （得乐）橡胶硬度计、测厚规、深度表
9、日本FUJITOOL （富士）半径规、角度尺
10、瑞士SYLVAC 数显百分表、千分表
11、日本TOKYO SEIKI （精机株式会社）横向张力计及纺织专用张力计
12、日本YOKOGAWA（横河）线速计、UR1800工业记录仪,DR230记录仪
13、日本SATO （佐腾）温湿度记录仪，红外线测温仪.电子表面温度计
14、日本ANRITSU 表面温度计，温度测头
15、台湾TES噪音计，温度计
16、日本URYU（瓜生）气动工具系列
17、日本YOKOGAWA横河铜线,漆包线专用张力计
18、日本KETT凯特膜厚计涂层测厚仪
19、美国Hyprez喜百事研磨膏，润滑油
20、瑞士TETKO网板张力计
21、日本ISUZU东京温湿度记录仪
22、瑞士CORREX确力士横向张力计
23、日本OTSUKA大冢台式放大镜
24、日本SUCCESS成功牌指针式推拉力计
25、日本Digitech迪吉特数显推拉力计，推拉力测试台
26、日本JEIC/ACO震动计，噪音计
① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内
使用，并注明"来源：易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源：xxx（非本网）"的作品，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ，必须保留本网注明的"稿件来源"，并自负版权等法律责任。
③ 如涉及作品内容、版权等问题，请在作品发表之日起两周内与本网联系，否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布，信息内容真实性、准确性与合法性由相关企业负责，易推广对此不承担任何责任，如遇非法或侵权信息欢迎监督，请联系QQ：1273397930或者发邮件至：1273397930@qq.com，如有确实证件证明属实，本站将对其删除处理，谢谢！
⑤ 本信息由注册会员：苏州伟创精密仪器有限公司发布并且负责版权等法律责任。
易推广客服微信
