CHKQ203/75钻杆钳-Slanthole钻杆钳价格-江苏钻杆钳厂家

CHKQ203/75钻杆钳-Slanthole钻杆钳价格-江苏钻杆钳厂家
本系列钻杆钳适用于石油、矿场钻井作业。使用本钳能起到安全、省力，提高钻井施工效率。本钳具有以下特点：
背钳夹紧及换档采用压缩空气（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）；
旋扣钳和扭矩钳一体结构（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）；
可不停车换档（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）；
新旧接头均卡紧可靠；
正反向都可产生最大扭矩和转速（除CHKQ203/75外）。
注：ZQ203/75X和ZQ203/145X型采用行星爪夹紧机构，在适应范围内不需要更换任何零件。
    CHKQ203/75型为斜井钻机专用钻井钳，钳体最大移送距离700 mm，钳体升降范围0~360 mm，一次冲扣转角30°，适应斜井角度0～45°。
The Drill Pipe Tong is applicable in the petroleum ａnd mine drilling, it is safety ａnd labor saving, ａnd improving the working efficiency. The tongs have the following features:
Using pneumatic power to shift ａnd drive backup tong （ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）.
It is a integral mechanism made by spin tong ａnd torque tong（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）.
Changing gear allowed during operation（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）.
New or old drilling pipe joint could be clamped reliably
Both directions could run the maximum torque ａnd rotation speed（except CHKQ203/75）.
 Remark:Model ZQ203/75X ａnd ZQ203/145X: using planet claw, needn’t to change any parts in application range.
        Model CHKQ203/75 drill pipe tong used Specifically for slant hole drilling rig,maximum thrust distance of tong is 27″.Rise ａnd fall range of the tong is 0~14″.Washed-up corner one time is 30°.The available corner of inclined well is 0～45°.

盐城特达///CHKQ203/75钻杆钳-Slanthole钻杆钳价格-江苏钻杆钳厂家