您的位置:首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 其他类型钳工工具 > 日本思达扭力工具
Management of air tool / oil pulse tool |
仠Torque Tester 丂DI-4B-25 |
丂丂丂 |
For Daily Torque measurement of a small impact Tool, Air screw DriversHigh Torque Electric drivers DI-4B-25 - Up to MAX. 25 N.m (250 kgf.cm) - With Blow Counter for Impact Tools. - High Luminous LED Display for high visibility in dark place |
Specification | DI-4B-25 | |||
Measuring range | 0.30乣25 N 丂3.0乣250 kgf丒cm丂3.0乣220 lbf丒in | |||
Operative Measuring Range at P-D Mode | 0.70 - 25 N.m 丂丂7.0 - 250 kgf.cm丂丂7.0 - 220 lbf.in | |||
Accuracy | 亇 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | |||
Display | Torque Meter | LED Digital Display, 4 digits | ||
Blow Counter | LED Digital Display, 2 digits (Displayed only in P-P mode) | |||
Measureing Direction | CW, CCW selectable with a Switch | |||
M''ment Mode | P-P Peak | Holding Peak Load Value | ||
T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | |||
P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||
Blow Counter | Count Range | Zero to 99 blow | ||
Count Time | 0.1 - 9.9 seconds | |||
Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button | |||
Data output | Serial Interface RS232C (Baud rate: 9600) | |||
Power Supply | Battery | Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh) | ||
Automatic PW off | Automatically power off after 5 minutes left without operation | |||
Charging time | Within 6 hours | |||
Continunous working time | 8 hours | |||
Battery Life Time | Chargeable more than 300 times | |||
Weight | 2.1kg | |||
Dimension | 150(W) x220(D) x74 (H) | |||
Accessories (one piece each) | Bit Socket ( 6.35 HEX - Subtense 17mm ) | |||
Measuring Joint : Hard Type (M10) & Soft Type (M10) | ||||
Socket for Wrenches ( Subtense 17mm ) | ||||
Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output | ||||
Exclusive receipt case | ||||
An inspection report, a proofreading certificate, traceability system figure |
Attachment丂About the method of application of an attachment | |
Soft joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 3 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For elastic body. | |
Hard joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 1/10 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For hard body. |
上海伟创精密仪器有限公司是集日本,美国,瑞士,德国品牌仪器,仪表,量具,工具,设备为一体的大型批发商。主要经营品牌如下:
1、日本TOHNICHI (东日)扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪 2、日本CEDAR思达数显扭力扳手、扭力起子、电动工具扭力检测仪、气动工具扭力检测仪 3、日本KANON (中村)扭力起子、扭力扳手、扭力测试仪
4、日本AIKOH (爱光)指针、数显式推拉力计、按键测试仪、弹簧拉压力测试台 5、日本SHIMPO (电产)推拉力计、测试台、张力计、频闪仪,转速表
6、日本IMADA (依梦达)指针式推拉力计、数显推拉力计、测试台
7、 日本PEAK (东海)放大镜,刻度放大镜,带灯放大镜,笔式放大镜,百倍镜,头盔镜,圆筒放大镜 8、 日本MITUTOYO (三丰)测量工具,数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计
9、 日本EIESN艾森 精密针规、 日本SK新泻 精密针规 美国MEYER英制针规 日本ISSOKU/JPG精密塞规,环规
10 、日本PEACOCK (孔雀)百分表,千分表,杠杆百分表,杠杆千分表,测厚表,深度计,量规,卡规 11、日本TELOCK (得乐)橡胶硬度计、测厚规、深度表
12、日本FUJITOOL (富士)半径规、角度尺
13、瑞士SYLVAC 数显百分表、千分表
14、日本FSK 精密水平尺;方型水平仪,长型水平仪,可调式水平仪,偏心检测器
15、日本KANETEC (强力牌) V 型磁性座、磁性表座、高斯计
16、日本TOKYO SEIKI (精机株式会社)横向张力计及纺织专用张力计
17、日本YOKOGAWA(横河)线速计、UR1800工业记录仪,DR230记录仪
18、日本SATO (佐腾)温湿度记录仪,红外线测温仪.电子表面温度计
19、日本ANRITSU 表面温度计
20、日本KNAETEC (强力牌)高斯计、脱磁器
21、台湾TES 噪音计
22、日本URYU(瓜生)气动工具系列
23、日本YOKOGAWA横河铜线,漆包线专用张力计
24、日本KETT凯特膜厚计涂层测厚仪
25、英国ENGIS研磨膏
26、瑞士TETKO网板张力计中国一级代理商
27、日本ISUZU东京温湿度记录仪
28、瑞士CORREX确力士张力计
29、日本OTSUKA大冢台式放大镜
30、日本SUCCESS成功牌指针式推拉力计
31、日本Digitech迪吉特数显推拉力计,推拉力测试台
32、美国Hyprez喜百事研磨膏,润滑油
33、日本JEIC/ACO震动计
34、瑞士TESA 测量工具,数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计,影像测量仪,三坐标等中国一级代理商
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:上海伟创精密仪器有限公司发布并且负责版权等法律责任。
易推广客服微信