您的位置：首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 其他试验机 > 日本思达扭力测试仪器
| Measurement of torque driver / torque wrench |
| 仠 TORQUE TESTER 丂DIS-IP series |
 |
| Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D). |
| Specification | DIS-IP05 | 俢IS-俬俹5 | 俢IS-俬俹50 | 俢IS-俬俹200 | 俢IS-俬俹500 | |
| Measuring range (at time of Track) | 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Accuracy | 亇0.5% (499 or less digit亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat (Baud rate :19200) | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||||
| Accessories (one piece each) | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 |  |
| 俙 | 兂40 | 兂50 | 兂60 | 兂80 | |
| 俛 | 41.2 | 63 | 73 | 99 | |
| 俠 | 5 | 10 | 10 | 15.5 | |
| 俢 | 兂60 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂50 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂4.2 | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 6.35倱倯 | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| weight | 189倗 | 632倗 | 1.8倠倗 | 3倠倗 | |
上海伟创精密仪器有限公司是集日本,美国,瑞士,德国品牌仪器,仪表,量具,工具,设备为一体的大型批发商。主要经营品牌如下:
1、日本TOHNICHI （东日）扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪 2、日本CEDAR思达数显扭力扳手、扭力起子、电动工具扭力检测仪、气动工具扭力检测仪 3、日本KANON （中村）扭力起子、扭力扳手、扭力测试仪
4、日本AIKOH （爱光）指针、数显式推拉力计、按键测试仪、弹簧拉压力测试台 5、日本SHIMPO （电产）推拉力计、测试台、张力计、频闪仪,转速表
6、日本IMADA （依梦达）指针式推拉力计、数显推拉力计、测试台
7、 日本PEAK （东海）放大镜，刻度放大镜,带灯放大镜,笔式放大镜,百倍镜,头盔镜,圆筒放大镜 8、 日本MITUTOYO （三丰）测量工具，数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计
9、 日本EIESN艾森 精密针规、 日本SK新泻 精密针规 美国MEYER英制针规 日本ISSOKU/JPG精密塞规，环规
10 、日本PEACOCK （孔雀）百分表,千分表,杠杆百分表,杠杆千分表,测厚表,深度计,量规,卡规 11、日本TELOCK （得乐）橡胶硬度计、测厚规、深度表
12、日本FUJITOOL （富士）半径规、角度尺
13、瑞士SYLVAC 数显百分表、千分表
14、日本FSK 精密水平尺；方型水平仪,长型水平仪,可调式水平仪，偏心检测器
15、日本KANETEC （强力牌） V 型磁性座、磁性表座、高斯计
16、日本TOKYO SEIKI （精机株式会社）横向张力计及纺织专用张力计
17、日本YOKOGAWA（横河）线速计、UR1800工业记录仪,DR230记录仪
18、日本SATO （佐腾）温湿度记录仪，红外线测温仪.电子表面温度计
19、日本ANRITSU 表面温度计
20、日本KNAETEC （强力牌）高斯计、脱磁器
21、台湾TES 噪音计
22、日本URYU（瓜生）气动工具系列
23、日本YOKOGAWA横河铜线,漆包线专用张力计
24、日本KETT凯特膜厚计涂层测厚仪
25、英国ENGIS研磨膏
26、瑞士TETKO网板张力计中国一级代理商
27、日本ISUZU东京温湿度记录仪
28、瑞士CORREX确力士张力计
29、日本OTSUKA大冢台式放大镜
30、日本SUCCESS成功牌指针式推拉力计
31、日本Digitech迪吉特数显推拉力计，推拉力测试台
32、美国Hyprez喜百事研磨膏，润滑油
33、日本JEIC/ACO震动计
34、瑞士TESA 测量工具，数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计,影像测量仪,三坐标等中国一级代理商
① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内
使用，并注明"来源：易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源：xxx（非本网）"的作品，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ，必须保留本网注明的"稿件来源"，并自负版权等法律责任。
③ 如涉及作品内容、版权等问题，请在作品发表之日起两周内与本网联系，否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布，信息内容真实性、准确性与合法性由相关企业负责，易推广对此不承担任何责任，如遇非法或侵权信息欢迎监督，请联系QQ：1273397930或者发邮件至：1273397930@qq.com，如有确实证件证明属实，本站将对其删除处理，谢谢！
⑤ 本信息由注册会员：上海伟创精密仪器有限公司发布并且负责版权等法律责任。
易推广客服微信
