您的位置:首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 手动扳手 > CEDAR数显扭力扳手
DIGITAL TORQUE WRENCH DIW-120/75/20/15 |
(1) Unify the display section and a frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple |
*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed *Available in: lb-in, kg-cm and N-m *Peak, Real Time and Peak Down measuring mode (selectable) *800 data memory. *Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter *Programmable Auto Zero function resets unit to zero for easy operation *Both CW and CCW operation *ASCII format output(USB) *Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use * AC charger and carrying case included. |
NEW DEVELOPMENT Wrench head awivels 300° |
Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 | |
Measuring range N?m (at the time of Track) | 0.20 - 15 N?m | 0.20 - 20 N?m | 0.20 - 75 N?m | 2.0 - 120 N?m | |
2.0~150 kgf?cm | 2.0~200 kgf?cm | 2.0~750 kgf?cm | 20~1200 kgf?cm | ||
2.0~130 lbf?in | 2.0~174 lbf?in | 2.0~650 lbf?in | 20~1040 lbf?in | ||
Accuracy | ±0.5% (F/S) (199 or less digit±1digit) | ±0.5% (F/S) (499 or less digit±3digit) | ±0.5% (F/S) (199 or less digit±1digit) | ||
Display | The 4 figures digital display of LCD | ||||
The measurement direction | CW-CCW (right and left) | ||||
Measuring mode | P-P Peak | Holding Peak Load Value | |||
T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | ||||
P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||||
C Real-time output | Load torque value is outputted every about1/ 160 second | ||||
Decision function | Setting of torque value | Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing | |||
The Maximum, the minimum, and the average value | Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||||
Data spec. | Data transfer | ASCII format (Baud rate : 19200) | |||
Data memory | 800 data / ten channels data | ||||
A setup of the number of counts | One to 99 count (count in a direction with a bundle) | ||||
Auto power save | 10 minutes no use, automatically switch off. | ||||
Charging time | From empty - less than 5hours | ||||
Continunous working time | 12 hours | ||||
Outside size | φ34(grip)×236(L) | φ34(grip)×235(L) | φ34(grip)×320(L) | φ34(grip)×445(L) | |
Weight (about) | 430g | 470g | 620g | 830g | |
Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball | ||
Attachment | - | One-way socket | |||
Accessories (one piece each) | AC/DC adaptor | ||||
An inspection report, a proofreading certificate, a traceability system figu |
上海伟创精密仪器有限公司是集日本,美国,瑞士,德国品牌仪器,仪表,量具,工具,设备为一体的大型批发商。主要经营品牌如下:
1、日本TOHNICHI (东日)扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪 2、日本CEDAR思达数显扭力扳手、扭力起子、电动工具扭力检测仪、气动工具扭力检测仪 3、日本KANON (中村)扭力起子、扭力扳手、扭力测试仪
4、日本AIKOH (爱光)指针、数显式推拉力计、按键测试仪、弹簧拉压力测试台 5、日本SHIMPO (电产)推拉力计、测试台、张力计、频闪仪,转速表
6、日本IMADA (依梦达)指针式推拉力计、数显推拉力计、测试台
7、 日本PEAK (东海)放大镜,刻度放大镜,带灯放大镜,笔式放大镜,百倍镜,头盔镜,圆筒放大镜 8、 日本MITUTOYO (三丰)测量工具,数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计
9、 日本EIESN艾森 精密针规、 日本SK新泻 精密针规 美国MEYER英制针规 日本ISSOKU/JPG精密塞规,环规
10 、日本PEACOCK (孔雀)百分表,千分表,杠杆百分表,杠杆千分表,测厚表,深度计,量规,卡规 11、日本TELOCK (得乐)橡胶硬度计、测厚规、深度表
12、日本FUJITOOL (富士)半径规、角度尺
13、瑞士SYLVAC 数显百分表、千分表
14、日本FSK 精密水平尺;方型水平仪,长型水平仪,可调式水平仪,偏心检测器
15、日本KANETEC (强力牌) V 型磁性座、磁性表座、高斯计
16、日本TOKYO SEIKI (精机株式会社)横向张力计及纺织专用张力计
17、日本YOKOGAWA(横河)线速计、UR1800工业记录仪,DR230记录仪
18、日本SATO (佐腾)温湿度记录仪,红外线测温仪.电子表面温度计
19、日本ANRITSU 表面温度计
20、日本KNAETEC (强力牌)高斯计、脱磁器
21、台湾TES 噪音计
22、日本URYU(瓜生)气动工具系列
23、日本YOKOGAWA横河铜线,漆包线专用张力计
24、日本KETT凯特膜厚计涂层测厚仪
25、英国ENGIS研磨膏
26、瑞士TETKO网板张力计中国一级代理商
27、日本ISUZU东京温湿度记录仪
28、瑞士CORREX确力士张力计
29、日本OTSUKA大冢台式放大镜
30、日本SUCCESS成功牌指针式推拉力计
31、日本Digitech迪吉特数显推拉力计,推拉力测试台
32、美国Hyprez喜百事研磨膏,润滑油
33、日本JEIC/ACO震动计
34、瑞士TESA 测量工具,数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计,影像测量仪,三坐标等中国一级代理商
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:上海伟创精密仪器有限公司发布并且负责版权等法律责任。
易推广客服微信