您的位置:首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 其他试验机 > CEDAR电批扭力测试仪
DI-9 series is most suitable for checking and controlling the torque of Electric Screwdriver and Torque Driver. |
upgrade The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P). |
Specification | DI-9M-8 | DI-9M-08 | |
Measuring range | 0.020-8 N?m | 2.0-800 mN?m | |
0.20~80 kgf?cm | 0.020~8 kgf?cm | ||
0.20~70 lbf?in | 0.020~7 lbf?in | ||
Accuracy | ±0.5% (499 digit or less ±3digit) | ||
Display | The 4 figures digital display of LCD | ||
The measurement direction | CW-CCW (right and left) | ||
Zero return by one touch | Return to zero by pressing clear button. | ||
Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | ||
High and low limits judging function | High and low value are measurement within the limits, and can be set up. | ||
Real-time Output | Load torque value is outputted every about1/ 180 second. | ||
The Maximum, the minimum, and the average value display | The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels. | ||
Data Output | ASCII format (baud rate 19200) | ||
Auto power save | 10 minutes no use, automatically switch off. | ||
Power supply | Ni-Cd chargeable battery 1.2V × 5cells 700mAh | ||
Charging time | About 3hours | ||
Continuous working time | About 12hours | ||
clearance | It is a display clearance in set-up time. (0.1 - 3.0 sec) | ||
Socket size | □ 20mm/ □9.5mm | ||
Dimension / Weight | W:160×D:125×H:55 / About 1kg | ||
Recommend buffer accessories | Measuring joint OW-20/OW-60 | Measuring joint OW-025/OW-10 | |
Cube (with a 5th page screw hole) 20x20x20 (M2.6/M3/M4/M5/M6 Tap processing) | |||
AC/DC adaptor | |||
Exclusive receipt case | |||
An inspection report, a proofreading certificate, a traceability system figure |
● MEASURING JOINT OW series | |
Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, and work efficiency improved. |
Specification | Type | ||||
OW-025 | OW-10 | OW-20 | OW-60 | ||
Measuring range N?m | 0.25 | 1 | 2 | 6 | |
Mechanical life (times) | 10,000 | 8,000 | 5,000 | 5,000 | |
Outer diameter size (mm) | Bit engagement part (screw part) | M2.6 cross recess screw | M3 cross recess screw | M4 cross recess screw | M6 cross recess screw |
The standard screw is cross recess screw but they may be altered as necessary | |||||
Outside diameter | φ28 | φ32 | φ32 | φ38 | |
Height | 44 | 51 | 51 | 69 | |
Installation | 20square ×4(t) |
上海伟创精密仪器有限公司是集日本,美国,瑞士,德国品牌仪器,仪表,量具,工具,设备为一体的大型批发商。主要经营品牌如下:
1、日本TOHNICHI (东日)扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪 2、日本CEDAR思达数显扭力扳手、扭力起子、电动工具扭力检测仪、气动工具扭力检测仪 3、日本KANON (中村)扭力起子、扭力扳手、扭力测试仪
4、日本AIKOH (爱光)指针、数显式推拉力计、按键测试仪、弹簧拉压力测试台 5、日本SHIMPO (电产)推拉力计、测试台、张力计、频闪仪,转速表
6、日本IMADA (依梦达)指针式推拉力计、数显推拉力计、测试台
7、 日本PEAK (东海)放大镜,刻度放大镜,带灯放大镜,笔式放大镜,百倍镜,头盔镜,圆筒放大镜 8、 日本MITUTOYO (三丰)测量工具,数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计
9、 日本EIESN艾森 精密针规、 日本SK新泻 精密针规 美国MEYER英制针规 日本ISSOKU/JPG精密塞规,环规
10 、日本PEACOCK (孔雀)百分表,千分表,杠杆百分表,杠杆千分表,测厚表,深度计,量规,卡规 11、日本TELOCK (得乐)橡胶硬度计、测厚规、深度表
12、日本FUJITOOL (富士)半径规、角度尺
13、瑞士SYLVAC 数显百分表、千分表
14、日本FSK 精密水平尺;方型水平仪,长型水平仪,可调式水平仪,偏心检测器
15、日本KANETEC (强力牌) V 型磁性座、磁性表座、高斯计
16、日本TOKYO SEIKI (精机株式会社)横向张力计及纺织专用张力计
17、日本YOKOGAWA(横河)线速计、UR1800工业记录仪,DR230记录仪
18、日本SATO (佐腾)温湿度记录仪,红外线测温仪.电子表面温度计
19、日本ANRITSU 表面温度计
20、日本KNAETEC (强力牌)高斯计、脱磁器
21、台湾TES 噪音计
22、日本URYU(瓜生)气动工具系列
23、日本YOKOGAWA横河铜线,漆包线专用张力计
24、日本KETT凯特膜厚计涂层测厚仪
25、英国ENGIS研磨膏
26、瑞士TETKO网板张力计中国一级代理商
27、日本ISUZU东京温湿度记录仪
28、瑞士CORREX确力士张力计
29、日本OTSUKA大冢台式放大镜
30、日本SUCCESS成功牌指针式推拉力计
31、日本Digitech迪吉特数显推拉力计,推拉力测试台
32、美国Hyprez喜百事研磨膏,润滑油
33、日本JEIC/ACO震动计
34、瑞士TESA 测量工具,数显卡尺.千分尺.高度计.百分表.千分表.表面粗糙度计,影像测量仪,三坐标等中国一级代理商
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:上海伟创精密仪器有限公司发布并且负责版权等法律责任。
易推广客服微信