阅读排行榜

手写达人

猜您喜欢

标题C64210 高强度铝硅青铜

提供者：东莞市协昌金属材料有限公司发布时间：2021/10/19 阅读次数：169次 >>进入该公司展台

典型用途

电气：杆线五金
工业：轴承（高强度/耐腐蚀）、衬套（飞机）、化学工艺设备、酸洗设备、阀体、阀杆
船舶：螺栓、锁紧垫圈、螺母、螺钉

Similar or Equivalent Specification

CDA	ASTM	SAE	AMS	Federal	Military	Other
C64210	B150 B150M

Chemical Composition

Cu%1	Pb%	Sn%	Zn%	Fe%	Ni%2	Al%	Mn%	Si%	As%
Chemical Composition according to ASTM B150/B150M-19 1Cu value includes Ag. 2Ni value includes Co. Note: Cu + Sum of Named Elements, 99.5% min. Single values represent maximums.
Rem.	0.05	0.20	0.50	0.30	0.25	6.30- 7.00	0.10	1.50- 2.00	0.15

Machinability

Copper Alloy UNS No.	Machinability Rating	Density (lb/in3 at 68 °F)
C64210	60	0.278

Mechanical Properties

Mechanical Properties according to ASTM B150/B150M-19

C64210

HR50 Drawn ａnd Stress Relieved Temper (unless noted otherwise)

SIZE RANGE: UNDER 1/2" ROD AND BAR

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
90	620	45	310	9	80-100

SIZE RANGE: 1/2" TO 1" ROD AND BAR INCLUSIVE

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
85	585	45	310	12	80-100

SIZE RANGE: OVER 1" TO 2" ROD AND BAR INCLUSIVE

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
80	550	42	290	12	80-100

SIZE RANGE: OVER 2" TO 3" ROD AND BAR INCLUSIVE

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
75	575	35	241	15	70-95

SIZE RANGE: OVER 3" TO 4" ROD AND BAR INCLUSIVE (M20 as hot rolled)

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
70	483	30	207	15	65-95

SIZE RANGE: OVER 4" TO 6" ROD AND BAR (M30 as hot extruded)

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
70	483	25	172	15	65-95

Physical Properties

	US Customary	Metric
Physical Properties provided by CDA
Density	0.278 lb/in3 at 68 °F	7.7 gm/cm3 at 20 °C
Specific Gravity	7.7	7.7

关键词：C64210 铝硅青铜铝青铜

上一篇：241246.500 Powerpack 48/5800 48V 5800W ELTEK易达通信电源整流模块批发ELTEK易达高频开关电源模块ELTEK易达整流模块ELTEK易达直流屏充电模块下一篇：离心式切削液除油机

该提供者的其它文献

版权声明

① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内

使用，并注明"来源：易推广"。违者本网将追究相关法律责任。

② 本信息由注册会员：东莞市协昌金属材料有限公司发布并且负责版权等法律责任。