Castrol Optigear BM68
价格：￥电议
品牌名称：$brandModel.Title(进口品牌)型号： 原产地：中国大陆 发布时间：2018/3/30 11:24:03更新时间：2024/8/6 11:50:59
产品摘要：Castrol Optigear BM68Castrol Optigear BM100/Castrol Optigear BM 100欧润宝合成齿轮油 详细说明 （浏览849次）Castrol Optigear® BMCastrol Optigear BM- solid-free gear oils for extremely high
产品完善度： 访问次数：176
企业档案
会员类型：初级版会员
已获得易推广信誉 等级评定
18成长值
(0 -40)基础信誉积累，可浏览访问
(41-90)良好信誉积累，可接洽商谈
(91+ )优质信誉积累，可持续信赖
易推广初级版会员：9年
工商认证 【已认证】
最后认证时间：
注册号： 【已认证】
法人代表： 【已认证】
企业类型：经销商 【已认证】
注册资金：人民币888万 【已认证】
产品数：10016
参观次数：2247241
手机网站：http://m.yituig.com/c132299/
商铺地址：http://
详细内容
Castrol Optigear BM68
| Castrol Optigear BM100/Castrol Optigear BM 100欧润宝合成齿轮油 详细说明 （浏览849次） |
| Castrol Optigear® BM Castrol Optigear BM- solid-free gear oils for extremely high pressures containing a newly developed additive combination. Designed to reduce wear caused by surface fatigue, pitting, spalling, scuffing, scoring or irregularities during running-in period also where conventional EP gear oils or oils with solid lubricants fail. MICROFLUX TRANS® (TRANS=TRiple Action Non-sacrificial Surface engineering) improves friction surfaces to an extent not possible with normal machining processes ａnd conventional EP lubricants. In a tribological system the polarized MICROFLUX TRANS additives instantaneously create a passive film on friction surfaces before friction occurs. At a given load level, the MICROFLUX TRANS additives creates resistant protective layer on friction surfaces. Under severe load, components of the MICROFLUX TRANS additive combination are activated ａnd diffuse into the surfaces initiating an improvement of their friction characteristics through plastic deformation. The organic reaction products become a component of the tribopolymer system. Unlike the case with conventional lubricants, the tribopolymers formed by MICROFLUX TRANS are long-chained compounds with excellent lubricity ａnd adhesion. The load carrying area is improved, a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction is CASTROL surface engineering ａnd achieves a non-sacrificial micro-smoothing of the friction surfaces. The MICROFLUX TRANS additive technology provides optimum wear protection ａnd an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying operational conditions. Advantages shortens running-in periods ａnd allows running-in of lubrication surfaces under full load from the start outstanding load carrying capacity optimum wear protection in high load range excellent anti-wear properties smoothing of existing pitting surface improvement to an extent not possible before increase of supporting surfaces ａnd load carrying capacity (70 - 80% after initial run-in) reduction of noise levels extreme long oil drain intervals low foaming tendency extremely low coefficient of friction resulting in energy savings compatible with nonferrous metal compatible with paints ａnd conventional seal materials excellent corrosion protection exceeds AGMA specifications 250.04 for EP gear oils Castrol Industrial Americas 150 W. Warrenville Road Naperville, IL 60563 Tel (877) 641 1600 Fax (877) 648 9801 Castrol Optigear BM – 3-Sep-04 Page 1 of 3 Product Data Usage In all types of industrial gears, especially operating under extremely heavy loads, even where conventional EP oils fail: gears exposed to high sliding friction ａnd high Hertzian surface pressures up to 2000 N/mm2 (elevators, rolling mills, belt conveyors, extruders, vibrating equipment, crushers, high speed looms, rear axles, separators eccentrics, cam shafts, planetary gears variable speed drives (PIV) hypoid gears (API-GL5/GL6) In all types of bearings, especially for spherical roller bearings, full complement cylindrical roller bearings, thrust bearings For sealed gear couplings Cost-benefit offered by MICROFLUX TRANS additive technology extended lifetime of machine elements ａnd wear parts, lower maintenance ａnd labor costs by minimized wear ａnd friction full load operation within shortest time, virtually eliminating the running-in period lower costs for lubricants ａnd waste oil disposal because of significant extensions of both service life ａnd relubrication intervals energy savings due to reduced coefficient of friction, lower temperature of lubricant ａnd component, improvement in operating efficiency product consolidation, i.e. simplification ａnd reduction of lubes ａnd spare parts reduction of noise resulting from high frequency stick-slip for "life" lubrication in some applications Application Viscosity recommended by equipment manufacturers must be followed. Miscible with all unleaded gear oils based on mineral oils. Maximum performance only if applied unmixed. Castrol Optigear BM oils can be filtered in all common filter systems ａnd separators due to their homogeneous, oil soluble additives. Attention: Not for use in synchronized gears ａnd for limitedslip/self-locking differential gears. MICROFLUX TRANS® registered trade mark of a patented Castrol additive combination for performing surface engineering in tribological systems. Castrol Industrial Americas 150 W. Warrenville Road Naperville, IL 60563 Tel (877) 641 1600 Fax (877) 648 9801 Castrol Optigear BM – 3-Sep-04 Page 2 of 3 Castrol Industrial Americas 150 W. Warrenville Road Naperville, IL 60563 Tel (877) 641 1600 Fax (877) 648 9801 Castrol Optigear BM – 3-Sep-04 Page 3 of 3 Product Data Typical Characteristics Unit 68 100 150 220 320 460 680 1000 3000 Color - brown brown brown brown brown brown brown brown brown ISO viscosity group 68 100 150 220 320 460 680 1000 3000 AGMA - 3 EP 4 EP 5 EP 6 EP - - - - Specific gravity @ 60°F g/cm3 0.88 0.89 0.89 0.90 0.91 0.91 0.92 0.92 0.91 Kin.viscosity, @ 40° C/104°F, ASTM D-445 mm2/s 71.3 101 157 218 320 459 670 1000 3000 Kin.viscosity,@ 100° C/212°F mm2/s 9.4 11.4 15.0 18.8 24.3 30.6 37.8 50.0 122 Viscosity index, ASTM D-2270 VI 109 99 95 97 97 96 94 95 117 Flash Point, COC, ASTM D-92 °C 219 224 224 232 238 238 238 260 260 °F 425 435 435 450 460 460 460 500 500 Pour Point, ASTM D-97 °C -24 -24 -18 -16 -15 -12 -9 -9 0 °F -11 -11.2 -0.4 +3.2 +5.0 +10.4 +15.8 +15.8 +32 Copper corrosion 48h/100°C/212°F ASTM D-130 - 1a 1a 1a 1a 1a 1a 1a 1a 1a SRV test run Test mode 5 ae(2h, 300N, 50°C/122°F/ball/area) DIN 51834 Friction coefficient μ (min) 0.030 0.030 0.030 0.030 0.025 0.025 0.025 0.025 0.025 Friction coefficient(running in period) μ (max) 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 Wear mm 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 ball/scar ∅ μm 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 FZG Boundary lubrication A/8, 3/90 DIN 51345 Damage load stage mg/ >12 >12 >12 >12 >12 >12 >12 >12 >12 Seal compatibility Volume change SRE-MBR1 % -2.5 -2.5 -2.5 -2.5 -2.5 -2.5 -2.5 -2.5 -2.5 Shore hardness Shore +3 +3 +3 +3 +3 +3 +3 +3 +3 Subject to usual manufacturing tolerances. All reasonable care has been taken to ensure that this information is accurate as of the date |
