当前位置：易推广 > 其他产品/服务 > 其他产品/服务 > 其他产品/服务 > 深圳市深鹏孚润滑油有限公司 > 产品展示 > 福斯润滑油 > FUCHS RENOLIN ZAF68 D

FUCHS RENOLIN ZAF68 D

点击查看大图

价格：￥电议

型号：原产地：中国大陆发布时间：2018/4/2 14:47:29更新时间：2024/8/6 11:51:06

产品摘要：FUCHS RENOLIN ZAF68 D FUCHS RENOLIN ZAF D液压油　详细说明　（浏览693次）RENOLIN ZAF DPrintZinc and Ash-Free, Detergent Hydraulic OilsDiagram Zinc and Ash-Free, Deter

产品完善度：访问次数：153

企业档案

会员类型：初级版会员

已获得易推广信誉等级评定

18成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

易推广初级版会员：9年

工商认证【已认证】

最后认证时间：

注册号：【已认证】

法人代表：【已认证】

企业类型：经销商【已认证】

注册资金：人民币888万【已认证】

产品数：10016

参观次数：2228360

手机网站：http://m.yituig.com/c132299/

商铺地址：http://

产品分类

详细内容

FUCHS RENOLIN ZAF68 D

FUCHS RENOLIN ZAF D液压油　详细说明　（浏览693次）

RENOLIN ZAF D

Zinc ａnd Ash-Free, Detergent Hydraulic Oils

Diagram

Zinc ａnd Ash-Free, Detergent Hydraulic Oils

Zinc- ａnd ash-free hydraulic oils have steadily gained popularity over the last few years. In many cases the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic oils can contaminate other functional fluids.
RENOLIN ZAF D hydraulic oils are zinc- ａnd ash-free hydraulic oils with good detergent properties. The detergent agents in these oils reduce the formation of residues ａnd ageing by-products.
They are HM hydraulic oils in line with ISO 6743-4 but with additional detergent ａnd dispersant characteristics.

The most important features of RENOLIN ZAF D hydraulic oils are:

Good oxidation stability ａnd good resistance to ageing
Powerful EP properties ａnd very good wear protection
Excellent corrosion protection
Rapid air release ａnd low foaming
Good sludge transportation ａnd cleaning properties
Good compatibility with sealing materials

Application:

RENOLIN ZAF D products are high-grade HM hydraulic oils in line with ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils in line with ISO 6743-6. RENOLIN ZAF D products contain additives which avoid the formation of residues ａnd guarantee the functional reliability of machinery.

OLIN ZAF		32 D	46 D	68 D
Hydraulic oil type
acc. to ISO 6743-4		HM 32	HM 46	HM 68
acc. to DIN 51 502		HLPD 32	HLPD 46	HLPD 68
Lubricating oil type
acc. to ISO 6743-6		CKC 32	CKC 46	CKC 68
acc. to DIN 51 502		CLP 32	CLP 46	CLP 68
Characteristics	Unit				Test method
Colour		1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	32	46	68	ASTM D 445
at 100 °C	mm²/s	5.4	6.9	8.6	ASTM D 445
Viscosity index		100	105	97	ASTM D 2270
Density at 15 °C	kg/l	0.878	0.882	0.884	ASTM D 1298
Flash point, Cleveland open cup	°C	210	230	230	ASTM D 92
Pour point	°C	-33	-27	-24	ASTM D 97
Neutralization number	mg KOH/g	0.35	0.35	0.35	ASTM D 974
Saponification number	mg KOH/g	1.1	1.1	1.1	ASTM D 94
Air release at 50 °C	min	3	4	7	ASTM D 3427
Foaming,
seq. I	ml	30/0	50/0	50/0	ASTM D 892 seq. I-III
seq. II	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
seq. III	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h	mg KOH/g	< 2	< 2	< 2	ASTM D 943
Brugger boundary friction test	N/mm²	38	38	38	DIN 51 347 (D)
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	DIN 51 354-2
Vickers vane pump test, loss of mass
on ring	mg	<120	<120	<120	IP 281
on vanes after 250 h	mg	<30	<30	<30	IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change	%	7	6	5	DIN 53 521 together with DIN 53 505
change in Shore A hardness	Shore	-3	-3	-2	DIN 53 521 together with DIN 53 505