当前位置：易推广 > 其他产品/服务 > 其他产品/服务 > 其他产品/服务 > 深圳市深鹏孚润滑油有限公司 > 产品展示 > 福斯润滑油 > FUCHS PLANTOGEAR 320S

FUCHS PLANTOGEAR 320S

点击查看大图

价格：￥电议

型号：原产地：中国大陆发布时间：2018/4/2 15:25:32更新时间：2024/8/6 11:51:06

产品摘要：FUCHS PLANTOGEAR 320S FUCHS PLANTOGEAR S　详细说明　（浏览726次）FUCHS PLANTOGEAR SPrintEnvironmentally Friendly Gear and Lubricating Oils Based on Synthetic EstersDi

产品完善度：访问次数：219

企业档案

会员类型：初级版会员

已获得易推广信誉等级评定

18成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

易推广初级版会员：9年

工商认证【已认证】

最后认证时间：

注册号：【已认证】

法人代表：【已认证】

企业类型：经销商【已认证】

注册资金：人民币888万【已认证】

产品数：10016

参观次数：2234816

手机网站：http://m.yituig.com/c132299/

商铺地址：http://

产品分类

详细内容

FUCHS PLANTOGEAR 320S

FUCHS PLANTOGEAR S　详细说明　（浏览726次）

FUCHS PLANTOGEAR S

Environmentally Friendly Gear ａnd Lubricating Oils Based on Synthetic Esters

Diagram

Environmentally Friendly Gear ａnd Lubricating Oils Based on Synthetic Esters

It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions ａnd spillages when handling gear ａnd lubricating oils lead to direct pollution of the surroundings ａnd thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils ａnd synthetic esters.

The PLANTOGEAR S series of oils are based on synthetic esters. They represent an environmentally friendly alternative to mineral oil-based gear ａnd lubricating oils. They can be classified as CKC gear oils according to ISO 6743-6 ａnd meet ISO/CD 6743-4 guidelines for HEES fluids.

The advantages of PLANTOGEAR S are:

Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93)
German Water Hazard Class WGK 0, i.e. generally not hazardous for water
Non-toxic, physiologically harmless
Free of heavy metals
Good low-temperature characteristics
Excellent resistance to ageing ａnd oxidation
Excellent viscosity-temperature behaviour because of their high natural VI
Excellent anti-wear properties
Extremely shear-stable
Rapid air release
Minimal foaming
Insoluble in water
Good demulsibility characteristics
Applicable at tank temperatures ranging from -35 °C to +90 °C

Application:

PLANTOGEAR S lubricants can be used in spur gears, bevel gears, planetary gears ａnd worm gears at working temperatures up to 90 °C. PLANTOGEAR S oils are recommended for gearboxes ａnd circulation systems in packaging ａnd food stuff related industries as well as for gearboxes operated in Protected Water Zones ａnd in water purification plants.

For first-fill ａnd change-over procedures we recommend to flush the gearbox or lubrication system. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks ａnd gearboxes should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as synthetic esters. In general, we recommend the use of stainless steel tanks. Filter systems should also be compatible with synthetic esters.

The powerful cleaning effect of these fluids can dislodge large amounts of dirt ａnd contaminants ａnd this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOGEAR S. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering ａnd drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %.

The use of synthetic ester resistant sealing materials ａnd plastics is recommended.

Our application engineers will be glad to advise you on:

Experiences with these products
Application possibilities
Material compatibility
Change-over procedures

ａnd service facilities regarding PLANTO products.

Typical data:

PLANTOGEAR		100 S	150 S	220 S	320 S	460 S	680 S	1000 S
Lubricating oil type acc. to ISO 6743-6 acc. to DIN 51 502		CKC 100 CLPE 100	CKC 150 CLPE 150	CKC 220 CLPE 220	CKC 320 CLPE 320	CKC 460 CLPE 460	CKC 680 CLPE 680	CKC 1000 CLPE 1000
Characteristics	Unit								Test method
Colour		1	1	1	1	1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	101	148	220	325	467	686	1057	ASTM D 445
at 100 °C	mm²/s	17.8	23.4	33	47	60.6	82	113	ASTM D 445
Viscosity index		194	189	196	204	211	205	208	ASTM D 2270
Density at 15 °C	kg/l	0.925	0.926	0.927	0.929	0.931	0.933	0.935	ASTM D 1298
Flash point, Cleveland open cup	°C	290	252	290	290	290	290	>300	ASTM D 92
Pour point	°C	- 36	– 39	– 36	– 30	– 33	– 30	-27	ASTM D 97
Neutralization number	mg KOH/g	1.7	1.7	1.6	1.5	1.4	1.4	1.4	ASTM D 974
Foaming
seq. I	ml	5/0	5/0	10/0	20/0	20/0	20/0	60/0	ASTM D 892 seq. I-II
seq. II	ml	25/0	20/0	10/0	40/0	25/0	30/0	35/0	ASTM D 892 seq. I-II
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	1a-100A3	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	pass A	pass A	pass A	pass A	ASTM D 665
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	> 12	> 12	> 12	> 12	DIN 51 354-2