Mobilgard™ 560 VS

Diesel Engine Cylinder Oil

Product Description

Mobilgard™ 560 VS by ExxonMobil is a high performance, marine diesel engine cylinder oil designed for use in crosshead engines running heavy fuel with sulfur levels from 0.5-4%. This new cylinder lubricant technology provides maximum protection from adhesive ａnd corrosive wear at the higher operating temperatures ａnd pressures found in today＇s modern crosshead engines. The outstanding performance of Mobilgard 560 VS has been demonstrated at the highest peak firing pressures ａnd liner temperatures.

Mobilgard 560 VS employs additives with greater thermal stability ａnd acid-corrosion protection. It has an optimum viscosity of 20 cSt @ 100ºC ａnd low volatility for optimal lubricant distribution ａnd film retention. Through the use of patented technology, the oil’s higher viscosity is attained without the use of thermally unstable, deposit-producing bright stock. Unique additive technology at the 60 TBN alkalinity level in Mobilgard 560 VS has demonstrated outstanding ring ａnd liner protection ａnd cleanliness under sustained operation with fuel sulphur levels below 1% at equivalent 70 TBN oil feed rates.

 

Features ａnd Benefits

Mobilgard 560 VS cylinder oil offers the following features ａnd potential benefits:

Features	Advantages ａnd Potential Benefits
Excellent thermal ａnd oxidation stability	Helps reduce deposits ａnd sludge formation Clean engines reduce the lay-up time required for overhauls
Exceptional antiwear properties	Reduced liner ａnd ring wear helps promote extended periods between overhauls Excellent anti-scuffing control
Outstanding detergency capability	Excellent engine cleanliness increases combustion efficiency Helps miminise deposit formation with use of low sulfur (<1%) fuels
High TBN level ａnd retention	Effectively handles wide fuel sulfur range from 0.5-4.0% at 70 BN equivalent feed rates Helps to maximize protection against the corrosive effects of high sulphur fuels

 

Applications

Mobilgard 560 VS has been developed for marine crosshead engines designed for increased power ａnd fuel efficiency. Mobilgard 560 VS has also demonstrated excellent performance in earlier engine designs ａnd during slow speed steaming operation.

 

Specifications ａnd Approvals

 

Mobilgard™ 560 VS	High Sulfur HFO	Low Sulfur HFO
Meets OEM requirements:
MAN Diesel	X	X
Wartsila	X	X
Mitsubishi	X	X

 

To ensure achieving the maximum equipment life possible, particular attention should be paid to the manufacturer＇s special recommendations regarding the running-in of new rings ａnd liners.

Appropriate feed rates should be verified in all cases by through-the-ports inspection of liners for adequate oil film.

 

Typical Properties

 

SAE Grade	50
Specific Gravity at 15ºC	0.922
Flash Point, ºC, ASTM D 92	248
Pour Point, ºC, ASTM D 97	-20
cSt, at 40ºC	219
cSt, at 100ºC	20
Viscosity Index, ASTM D 2270	105
TBN, mg KOH/g, ASTM D 2896	60

 

 

Health ａnd Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

 

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation, or one of its subsidiaries.

 

 

8-2012 

Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved..