Mobilgard™ 300
Diesel Engine System Oil
Product Description
Mobilgard™ 300 by ExxonMobil is a premium quality, extra high performance system oil designed for crosshead diesel engines. High quality paraffinic base oils along with a balanced additive system provide excellent protection even for the severe operating conditions of the latest design, high-output crosshead marine diesel engines. This product has sufficient alkalinity to neutralise any strong acids which may find their way into the crankcase from the combustion of fuel sulphur, ａnd it has enhanced load carrying ability in order to reduce wear in heavily loaded bearings.
Features ａnd Benefits
Mobilgard 300 is formulated from high quality paraffinic base oils that have excellent thermal stability ａnd oxidation resistance. These base oil characteristics are augmented with a balanced additive system that includes special high temperature oxidation inhibitors, alkaline detergents, a load carrying component ａnd defoamant. The formulation has maximum antiwear properties, good rust protection in the presence of salt water, ａnd excellent water separation characteristics.
When used as recommended in crosshead type diesel engines, Mobilgard 300 system oil offers the following features ａnd potential benefits:
| Features | Advantages ａnd Potential Benefits |
| Improved thermal ａnd oxidation stability | Reduced deposits in piston cooling spaces ａnd crankcase
Better piston cooling efficiency |
| Enhanced detergency | Cleaner crankcases ａnd circulation tanks |
| Excellent rust ａnd corrosion properties | Longer bearing life
Protects critical bearing surfaces |
| Good water tolerance ａnd separation capability | Effective lubrication in the presence of water
Longer oil life due to efficient water separation |
Applications
Mobilgard 300 is recommended primarily for use as system oil in late model, high-output, crosshead diesel engines, especially those engines employing the system oil for piston cooling. It will prevent or reduce deposit formation in the piston cooling spaces, thus maintaining piston cooling efficiency ａnd reducing the incidence of piston burning ａnd piston crown cracking. It will also prevent or reduce crankcase deposits ａnd will provide outstanding protection for heavily loaded bearings. Its reserve alkalinity allows for the burning of high sulphur fuel. Good rust prevention ａnd water separation characteristics make Mobilgard 300 an excellent system oil in older design crosshead diesel engines which have water-cooled pistons ａnd where crankcase deposits can be a problem with lower-quality system oils.
Typical Properties
| SAE Grade | 30 |
| Specific Gravity at 15ºC | 0.889 |
| Flash Point, ºC, ASTM D 92 | 266 |
| Pour Point, ºC, ASTM D 97 | -12 |
| Viscosity, ASTM D 445 | |
| cSt, at 40ºC | 111 |
| cSt, at 100ºC | 12 |
| Viscosity Index, ASTM D 2270 | 97 |
| TBN, mg KOH/g, ASTM D 2896 | 5 |
| Sulphated Ash, wt%, ASTM D 874 | 0.73 |
Health ａnd Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office, or via the Internet on http://www.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The ExxonMobil logotype ａnd Mobilgard are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
10-2012
Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved..
