Caltex FM GREASE EP0  CHEVRON FM ALC EP 0, 1, 2 Food Machinery Grease CUSTOMER BENEFITS Chevron FM ALC EP greases deliver value through: • Excellent wear ａnd rust protection • Multipurpose — Product misapplication eliminated. Minimizes costly inventories while providing one grease that will work in a wide variety of applications. Available in three common NLGI grades to meet specific equipment requirements. • Reduced operating costs • Reduced wear ａnd sling out — Provides good wear protection ａnd is highly water-resistant to help prolong machinery life. • Water tolerance — Remains grease-like even when subject to gross water contamination or when subjected to direct water spray. • Excellent pumpability — Readily adaptable to centralized greasing systems. Easily handled in conventional grease-pumping equipment. • High dropping point — Assures protection where higher operating temperature properties are required. • Slightly tacky ａnd adhesive in nature • Quality control — Manufactured under closely controlled conditions to assure a high degree of purity food manufacturers demand today. • Compliance with state ａnd federal regulations — Composed of materials approved by FDA as incidental or accidental food additives. • Corrosion protection — Provides excellent corrosion protection during food processing ａnd plant cleanup procedures • EP properties — Excellent Timken ａnd Four Ball Weld Point values. FEATURES Chevron FM ALC EP food machinery greases are high performance, multipurpose products that are white in color, odorless, tasteless, ａnd water-resistant. Available in three NLGI grades, Chevron FM ALC EP were developed for the food processing ａnd canning industries. Chevron FM ALC EP greases are comprised of an aluminum complex thickener ａnd food grade white oils containing a highly effective rust inhibitor package. They are smooth ａnd buttery in texture, ａnd are also slightly tacky. All grades contain specially-blended additives that impart improved adhesive ａnd stringiness properties to the grease. APPLICATIONS Chevron FM ALC EP food machinery greases are multipurpose lubricants suitable for all grease-lubricated machinery located in canneries, beverage bottlers ａnd canners, potato/corn chip processors, candy manufacturers, meat ａnd poultry packers, frozen food processors, ａnd other food producers ａnd processors. They are specifically recommended for critical applications where there is a possibility of the lubricant becoming an incidental food ingredient. NLGI 0 is preferred for low temperature operations, particularly in centralized grease systems. NLGI 1 ａnd 2 are preferred for general plant lubrication including applications such as electric motors ａnd wheeled vehicles where NSF-registered H2 lubricants are often used. This allows for a reduction in the number of greases used in the plant. NLGI 2 is also recommended for those applications where the grease is exposed to high temperatures, steam, ａnd centrifugal action causing throw-off. Typical applications for Chevron FM ALC EP greases in processing plants include: • Electric motor bearings • Pump shaft bearings • Conveyor belts — Head, tail, ａnd roller bearings • Food handling machinery - Mechanical linkage • Automatic lube systems • Grease gun application • Grease packed bearings • Slides ａnd ways • Mobile equipment • Wheel bearings • Grease fittings • Seamers Chevron FM ALC EP — Continued ©2007 Chevron Products Company. San Ramon, CA. All rights reserved. 31 October 2007 FPL-8 Chevron FM ALC EP: • are formulated in compliance with the U.S. Food ａnd Drug Administration (FDA) requirements for lubricants with incidental food contact, 21 CFR 178.3570 ａnd other sections referenced therein. Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. • are certified by NSF ａnd are acceptable as a lubricant where incidental food contact may occur (H1) in ａnd around food processing areas. The NSF Nonfood Compounds Registration Program is a continuation of the USDA product approval ａnd listing program, which is based on meeting regulatory requirements of appropriate use, ingredient review ａnd labeling verification. • are certified Kosher ａnd Pareve. • are accepted by the Canadian Food Inspection Agency for use in Registered Plants ａnd for use on food equipment or machinery parts where contact with food is only incidental. TYPICAL TEST DATA Typical test data are average values only. Minor variations which do not affect product performance are to be expected in normal manufacturing. 1 Minimum operating temperature is the lowest temperature at which a grease, already in place, could be expected to provide lubrication. Most greases cannot be pumped at these minimum temperatures. 2 Maximum operating temperature is the highest temperature at which the grease could be used with frequent (daily) relubrication. * Determined on mineral oil extracted by vacuum filtration. NLGI Grade 0 1 2 Product Number 230202 230203 230204 MSDS Number 14860 14860 14860 Operating Temperature, °C(°F) Minimum1 Maximum2 -20(-4) 163(325) -20(-4) 163(325) -20(-4) 163(325) Penetration at 25°C(77°F) Unworked Worked 340 370 295 325 250 280 Dropping Point, °C(°F) 232(450) 260(500) 260(500) Timken OK load, lb 40 40 40 Four-Ball Weld Point, kg Wear Scar Diameter, mm 500 0.60 500 0.60 500 0.60 Thickener, % type 5.8 Aluminum Complex 6.9 Aluminum Complex 7.7 Aluminum Complex ISO Viscosity Grade, Base Oil Equivalent 220 220 220 Viscosity, Kinematic* cSt at 40°C cSt at 100°C 200 20.6 200 20.6 200 20.6 Viscosity, Saybolt* SUS at 100°F SUS at 210°F 1045 104 1045 104 1045 104 Viscosity Index* 120 120 120 Flash Point, °C(°F)* 246(475) 246(475) 246(475) Pour Point, °C(°F)* -25(-13) -25(-13) -25(-13) Texture Smooth, Adhesive Color White