FUCHS CASSIDA FLUID CR32 CASSIDA FLUID CR 32, 46, 68 ａnd 100 are high performance fluids specially developed for use in rotary screw ａnd vane air compressors used in the food ａnd beverage processing ａnd packaging industry. They are based on a careful blend of synthetic fluids ａnd selected additives chosen for their ability to meet the stringent requirements of the food industry. Certified by NSF for ISO 21469 ａnd registered by NSF (Class H1) for use where there is potential for incidental food contact. Produced according to FLT Quality Standards, in facilities where HACCP audit ａnd Good Manufacturing Practice have been implemented ａnd form part of the quality ａnd hygiene management systems ISO 9001 ａnd ISO 21469. CERTIFICATIONS AND SPECIFICATIONS • NSF H1 • NSF ISO 21469 • Kosher • Halal • DIN 51506 VBL, VCL, VDL • ISO 6743-3 DAG, DAH, DAJ APPLICATIONS • Screw ａnd vane compressors • Piston Compressors (ISO VG 100) • Plain ａnd anti-friction bearings • General purpose lubrication including light duty gearboxes PERFORMANCE FEATURES • Base fluids have an ability to provide superior lubrication under the majority of operating conditions • Very good anti-wear performance resulting in greater plant utilisation • CASSIDA FLUID CR has inherently good water shedding properties ａnd resistance to foaming • Excellent high temperature performance resists the formation of harmful products of oxidation at elevated temperatures, resulting in long oil life • Neutral odour ａnd taste • High viscosity index • Good protection against corrosion of all metal working surfaces • Good low temperature properties down to -40 °C These products have demonstrated similar performance to conventional compressor lubricants in rotary air compressors operating at normal temperatures, e.g. up to +100 °C. It is strongly recommended that a used oil and/ or equipment condition monitoring service be employed for extended periods of operation in excess of the pump manufacturers’ recommended oil change intervals. HANDLING AND STORAGE All food grade lubricants should be stored separately from other lubricants, chemical substances ａnd foodstuffs ａnd out of direct sunlight or other heat sources. Store between 0 °C ａnd +40 °C. Provided that the product has been stored under these conditions we recommend to use the product within 5 years from the date of manufacture. Upon opening a pack, the product must be used within 2 years (or within 5 years of date of manufacture, whichever is the sooner). TYPICAL CHARACTERISTICS (Typical for current production. Variations in these characteristics may occur.) CASSIDA FLUID CR 32 46 68 100 Property Test Method NSF Reg. No. 144684 144685 144686 144687 Colour Pale yellow Density at +15 °C     kg/m³ ISO 12185 836 838 843 846 Flashpoint      °C ISO 2592 247 252 256 258 Pourpoint      °C ISO 3016 -57 -57 -57 -54 Kin. Visc. at +40 °C    mm²/s ISO 3104 32 46 68 100 Kin. Visc. at +100 °C    mm²/s ISO 3104 6.14 7,88 10,9 14,6 Viscosity index ISO 2909 143 142 151 151 Demulsibility at +54 °C min. ISO 6614 5 15 15 20 (+82 °C) 121122 PE - 7508 SEAL AND PAINT COMPATIBILITY Compatible with the elastomers, gaskets, seals ａnd paints normally used in food machinery lubrication systems. As far as we know these information reflect the current state of knowledge ａnd our research. They cannot, however, be taken as an assurance about the properties nor as a guarantee of the suitability of the product for the individual case in point. Before using our products the purchaser must, therefore, check the suitability ａnd be satisfied that the output will be satisfactory. Our products are continually being up-dated. We reserve the right, therefore, to alter the information of this product information at any time ａnd without prior announcement. We are specialized in developing products for extreme tribological problems in cooperation with end users. FUCHS LUBRITECH provides service ａnd individual advice. Please contact us! E-Mail: cassida.lubricants@fuchs-lubritech.de FUCHS LUBRITECH GMBH Werner-Heisenberg-Straße 1 67661 Kaiserslautern / Germany T: +49 (0) 6301 3206-0 / F: +49 (0) 6301 3206-940