FUCHS RENOLIN CKC680价格
价格：￥电议
品牌名称：$brandModel.Title(进口品牌)型号：
原产地：中国大陆
发布时间：2018/5/16 9:23:40更新时间：2024/8/6 11:51:27
产品摘要：FUCHS RENOLIN CKC680价格福斯润滑油系列 > 齿轮油 > FUCHS RENOLIN CKC系列FUCHS RENOLIN CKC系列 详细说明 （浏览766次）RENOLIN CKC 详细说明 （浏览205次）RENOLIN CKCHigh Performance CKC Gear OilsHigh Performa
企业档案
会员类型：初级版会员
18成长值
(0 -40)基础信誉积累，可浏览访问
(41-90)良好信誉积累，可接洽商谈
(91+ )优质信誉积累，可持续信赖
易推广初级版会员：9年
工商认证 【已认证】
最后认证时间：
注册号： 【已认证】
法人代表： 【已认证】
企业类型：经销商 【已认证】
注册资金：人民币888万 【已认证】
产品数：10016
参观次数：2238376
手机网站：http://m.yituig.com/c132299/
商铺地址：http://
联系我们
深圳市深鹏孚润滑油有限公司
电话：18902852991
联系人：张明 (联系我时请说明是在易推广看到的！谢谢)
手机：18902852991
邮编：518109
邮箱：377761916@qq.com
地址：深圳市龙华区龙华街道清华社区龙观东路3号望成大厦8298
详细内容
FUCHS RENOLIN CKC680价格
| 福斯润滑油系列 > 齿轮油 > FUCHS RENOLIN CKC系列 |
| FUCHS RENOLIN CKC系列 详细说明 （浏览766次） | | RENOLIN CKC 详细说明 （浏览205次） | RENOLIN CKC High Performance CKC Gear Oils High Performance CKC Gear Oils
Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings ａnd the gears themselves, i.e. to reduce friction ａnd avoid wear but also to provide protection against corrosion, to cool ａnd to seal. The RENOLIN CKC gear oils contain carefully selected base oils ａnd matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.
The special characteristics of RENOLIN CKC series lubricants are:
- High pressure absorption ａnd excellent wear protection
- Good viscosity-temperature behaviour ａnd excellent low-temperature characteristics
- Good corrosion protection for steel ａnd nonferrous metals
- Good resistance to ageing
- Good compatibility with sealing materials
- Low foaming
- Avoidance of frictional vibration by the use of surface-active additives
- Good demulsification characteristics
- Multipurpose applications
Application:
RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur ａnd worm drive gears are reliably, effectively ａnd economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet ａnd smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.
| RENOLIN CKC | | 100 | 150 | 220 | 320 | 460 | 680 | | | Lubricating oil type | | | | | | | | | | acc. to ISO 6743-6 | | CKC 100 | CKC 150 | CKC 220 | CKC 320 | CKC 460 | CKC 680 | | | acc. to DIN 51 502 | | CLP 100 | CLP 150 | CLP 220 | CLP 320 | CLP 460 | CLP 680 | | | Characteristics | Unit | | | | | | | Test method | | Colour | | 2 | 3 | 4 | 4.5 | 5 | 5 | ASTM D 1500 | | Kinematic viscosity | | | | | | | | | | at 40 °C | mm²/s | 94.4 | 145.6 | 214 | 331 | 468 | 690 | ASTM D 445 | | at 100 °C | mm²/s | 11.1 | 14.5 | 18.5 | 24.6 | 30.8 | 36.8 | ASTM D 445 | | Viscosity index | | 102 | 98 | 96 | 96 | 95 | 87 | ASTM D 2270 | | Density at 15 °C | kg/l | 0.884 | 0.89 | 0.895 | 0.9 | 0.903 | 0.922 | ASTM D 1298 | | Flash point, Cleveland open cup | °C | 220 | 225 | 230 | 230 | 240 | 245 | ASTM D 92 | | Pour point | °C | – 27 | - 24 | - 21 | - 15 | – 12 | – 12 | ASTM D 97 | | Neutralization number | mg KOH/g | 0.33 | 0.33 | 0.33 | 0.33 | 0.33 | 0.33 | ASTM D 974 | | Saponification number | mg KOH/g | 1.3 | 0.84 | 0.84 | 0.84 | 0.84 | 0.84 | ASTM D 94 | | Sulphate ash | % mass | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | ASTM D 874 | | Water content | % mass | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | ASTM D 95 | | Insolubles | % mass | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | DIN 51 592 | | Demulsification | min | < 20 | < 20 | < 20 | < 20 | < 20 | < 20 | DIN 51 599 | | Foaming, | | | | | | | | | | seq. I | ml | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | ASTM D 892 seq. I-III | | seq. II | ml | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | ASTM D 892 seq. I-III | | seq. III | ml | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | ASTM D 892 seq. I-III | | Copper corrosion | degree of corr. | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | ASTM D 130 | | Rust prevention | | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 | | Ageing behavior, | | | | | | | | | | viscosity increase | % | 1 | 1 | 1 | 1 | 1 | 1 | ASTM D 2893 | | precipitation number increase | ml | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | ASTM D 2893 | | FZG mechanical gear rig test | load stage | 12 | 12 | 12 | 12 | 12 | 12 | DIN 51 354-2 | | Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, | | | | | | | | | | relative volume change | % | 7 | 7 | 7 | 7 | 7 | 7 | DIN 53 521 together with DIN 53 505 | | change in Shore A hardness | Shore | - 3 | - 3 | - 3 | - 3 | - 3 | - 3 | DIN 53 521 together with DIN 53 505 | | | |
