您好，欢迎来到易推广！ 请登录 免费注册

  • 高级会员服务
    • |
  • 广告位服务
    • |
  • 设为首页
    • |
  • 收藏本站
    • |
  • 企业档案

    • 会员类型：初级版会员
    • 易推广初级版会员：9年
    • 工商认证【已认证】
    • 最后认证时间：
    • 注册号： 【已认证】
    • 法人代表： 【已认证】
    • 企业类型：经销商 【已认证】
    • 注册资金：人民币888万 【已认证】
    • 产品数：10016

深圳市深鹏孚润滑油有限公司 主营产品：美孚润滑油系列，美孚齿轮油系列，美孚液压油，美孚压缩机油，美孚循环系统油，美孚涡轮机油/透平油，美孚机床用油，美孚切削液-防锈油，美孚冷冻机油，美孚工业润滑脂，美孚食品级润滑油，美孚风机用油和润滑脂

易推广认证请放心拨打

18902852991

当前位置： 易推广 > 其他产品/服务 > 其他产品/服务 > 其他产品/服务 > 深圳市深鹏孚润滑油有限公司 > 产品展示 > 福斯润滑油 > FUCHS RENOLIN MR 5.FUCHS RENOLIN MR5

FUCHS RENOLIN MR 5.FUCHS RENOLIN MR5

FUCHS RENOLIN MR 5.FUCHS RENOLIN MR5

点击查看大图

价格：￥电议

品牌名称：$brandModel.Title(进口品牌)型号： 原产地：中国大陆 发布时间：2018/5/16 9:49:50更新时间：2024/8/6 11:51:27

产品摘要：FUCHS RENOLIN MR 5.FUCHS RENOLIN MR5RENOLIN MRMultipurpose Lubricating Oil for Bearings, Gearboxes and Hydraulic SystemsMultipurpose Lubricating Oil for Bearings, Gearboxes and

产品完善度： 访问次数：152

企业档案

会员类型：初级版会员

已获得易推广信誉   等级评定
18成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+  )优质信誉积累，可持续信赖

易推广初级版会员：9年

工商认证 【已认证】

最后认证时间：

注册号： 【已认证】

法人代表： 【已认证】

企业类型：经销商 【已认证】

注册资金：人民币888万 【已认证】

产品数：10016

参观次数：2231206

手机网站：http://m.yituig.com/c132299/

商铺地址：http://

详细内容

 FUCHS RENOLIN MR 5.FUCHS RENOLIN MR5

RENOLIN MR

Multipurpose Lubricating Oil for Bearings, Gearboxes ａnd Hydraulic Systems

Multipurpose Lubricating Oil for Bearings, Gearboxes ａnd Hydraulic Systems

Engine oils have to perform many different functions. They not only have to lubricate, i.e. reduce friction ａnd wear but also to keep the machines clean, inhibit corrosion, seal ａnd cool. In many cases only one of these functions is emphasized while the others are neglected. But one must actually consider all of these functions along with their interactions. The places were most wear ａnd soiling takes place in an engine are the cylinder walls, pistons, rings, valves, distributor ａnd oil pump drives, camshafts, tappets, rockers, all bearings ａnd the sump. An oil must withstand a number of physical conditions, the most important of which being temperature. An oil is expected to perform satisfactorily from - 40 to + 300°C ａnd in some conditions even above this temperature without losing its efficiency. The oil in an engine is mechanically contaminated by combustion residues (soot), abraded metal particles, dust ａnd sand ａnd chemically affected by oxygen, acids ａnd water. The question is: Are these tasks ａnd requirements only applicable to engine oils? ａnd the answer is: No, all machinery lubricants have to fulfil similar requirements. Of course, the particular emphasis reflects the application in question.

The special RENOLIN MR oils are lubricants which satisfy the diversity of such applications. 
RENOLIN MR oils were developed over 30 years ago but are still among the leading hydraulic ａnd lubricating oils currently available. This is proof of the quality of these oils as well as confirmation of the foresight of FUCHS R + D laboratories which first developed these detergent hydraulic oils.

The RENOLIN MR series of oils offer the following advantages:


  • Multipurpose lubricating oils 
  • Excellent corrosion protection (characteristics of conservation oils are given) 
  • Excellent cleaning ａnd sludge transportation properties 
  • Friction ａnd wear reducing 
  • Good resistance to ageing
Application:

RENOLIN MR multipurpose lubricating oils are recommended for the running-in of machinery, for functional tests ａnd for operational lubrication. When factory-filled, RENOLIN MR oils guarantee running-in free of undue wear ａnd seizures in addition to complete protection of machinery internals against corrosion even in difficult conditions such as overseas shipment. A further advantage is that the factory-filled oil can remain in the machine all the way through to the first routine oil change interval.

If the machinery cannot be delivered factory-filled, the RENOLIN MR oil film remaining after the functional test offers good corrosion protection to all wetted surfaces. When used for normal operation, RENOLIN MR oils reduce wear, avoid stick-slip or frictional vibration ａnd protect against corrosion. Furthermore, they ensure that oil circuits remain clean.

RENOLIN MR oils are therefore recommended for machinery with low speed movements, if a good wetting film between cylinders ａnd sealing elements is required as well as when machinery is exposed to unfavourable atmospheric conditions such as large temperature fluctuations ａnd thus condensation formation, air-borne dust such as in foundries, in cement manufacturing plants or on construction sites ａnd last but by no means least, for machine tools especially if water-miscible cutting fluids are used.

RENOLIN MR 0, MR 1 ａnd MR 3 are heavy-duty spindle oils recommended for machine tools ａnd textile machinery. RENOLIN MR 0 especially for grinding machine spindles rotating faster than 2,000 rpm. RENOLIN MR 1 for machine tool spindles turning between 600 ａnd 2,000 rpm ａnd for textile machine spindles revolving faster than 10,000 rpm. RENOLIN MR 3 for machine tool spindles turning under 600 rpm ａnd for textile machine spindles revolving slower than 10,000 rpm.

RENOLIN MR 5, RENOLIN MR 10, RENOLIN MR 15, are heavy-duty hydraulic oils capable of withstanding continuous temperatures of over 100°C, even up to 120°C for short periods. They are recommended by leading manufacturers of hydraulic equipment ａnd in some cases, factory-filled.

RENOLIN MR 10 is also suitable for power steering systems. RENOLIN MR 10, RENOLIN MR 15 ａnd RENOLIN MR 20 are recommended for medium-duty transmissions, in particular those fitted with electromagnetic, multiple clutches. RENOLIN MR 30 ａnd RENOLIN MR 40 are recommended for heavy-duty transmissions.

RENOLIN   MR 0 MR 1 MR 3 MR 5 MR 10 MR 15 MR 20 MR 30 MR 40  
Hydraulic oil type                      
acc. to ISO 6743-4¹       HM 10 HM 22 HM 32 HM 46 HM 68 HM 100 HM 150  
acc. to DIN 51 502¹       HLPD10 HLPD 22 HLPD 32 HLPD 46 HLPD 68 HLPD 100    
Characteristics Unit                   Test method
Colour   1 1 1 1 1 1 1 2.5 3.5 ASTM D 1500
Kinematic viscosity                      
at 40 °C mm²/s 2.2 4.8 9.5 22 35 49 70 102 146 ASTM D 445
at 100 °C mm²/s 1 1.6 2.6 4.3 5.8 7.5 9 11.2 14.2 ASTM D 445
Viscosity index   – – - 100 107 116 102 95 95 ASTM D 2270
Density at 15 °C kg/l 0.825 0.843 0.86 0.878 0.883 0.884 0.885 0.892 0.898 ASTM D 1298
Flash point, Cleveland open cup °C 75 85 160 165 200 220 225 230 250 ASTM D 92
Pour point °C – 42 - 36 - 30 – 30 – 30 – 27 – 27 – 21 - 18 ASTM D 97
Neutralization number mg KOH/g         0.7         ASTM D 974
Saponification number mg KOH/g         2.4         ASTM D 94
Oxide ash % mass         0.27         ASTM D 482
Water content ASTM D 95 % mass not traceable not traceable not traceable not traceable not traceable not traceable not traceable not traceable not traceable  
Insolubles DIN 51 592 % mass not traceable not traceable not traceable not traceable not traceable not traceable not traceable not traceable not traceable  
Demulsification min non demulsifying non demulsifying non demulsifying non demulsifying non demulsifying non demulsifying non demulsifying non demulsifying non demulsifying DIN 51 599
Air release at 50 °C min 1 1 2 4 7 10 12 20 30 ASTM D 3427
Foaming,                      
seq. I ml < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 ASTM D 892 seq. I-III
seq. II ml < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 ASTM D 892 seq. I-III
seq. III ml < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 < 30/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass B pass B pass B pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,                      
viscosity increase %     3 2 2 2 2 2 1 ASTM D 2893
precipitation number increase ml     < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 10 10 10 10 10 10 10 10 10 DIN 51 354-2
Vickers vane pump test, loss of mass                      
on ring mg < 120 < 120 < 120 < 120 < 120 < 120 < 120 < 120 < 120 IP 281
on vanes after 250 h mg < 30 < 30 < 30 < 30 < 30 < 30 < 30 < 30 < 30 IP 281
Effect on SRE-NBR 1 seal material acc.to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,                      
relative volume change % 20 18 17 14 11 9 8 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore – 9 - 7 - 6 – 5 – 3 – 2 – 2 – 2 – 2 DIN 53 521 together with DIN 53 505

 

返回顶部

点击询价

联系方式

热门标签：FUCHS RENOLIN MR 5.FUCHS RENOLIN MR5 

展台首页| 公司简介| 供应产品| 产品目录| 公司动态| 荣誉证书| 招聘信息| 技术中心| 联系我们| 会员管理

易推广  设计制作，未经允许翻录必究.Copyright(C) 2009 http://www.yituig.com, All rights reserved.

以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，易推广对此不承担任何责任.   总访问量：2231206

中国彩虹热线

快速导航

返回顶部
在线咨询

提交