当前位置：易推广 > 其他产品/服务 > 其他产品/服务 > 其他产品/服务 > 深圳市深鹏孚润滑油有限公司 > 产品展示 > 福斯润滑油 > FUCHS RENOLIN AW68价格

FUCHS RENOLIN AW68价格

点击查看大图

价格：￥电议

型号：原产地：中国大陆发布时间：2018/5/16 10:11:33更新时间：2024/8/6 11:51:27

产品摘要：FUCHS RENOLIN AW68价格福斯润滑油系列 > 液压油 > 福斯抗磨液压油AW32/46/68 FUCHS AW抗磨液压油福斯抗磨液压油AW32/46/68 FUCHS AW抗磨液压油　详细说明　（浏览1375次） FUCHS RENOLIN AW系列详细信息:RENOLIN AWZinc- and Ash-Free

产品完善度：访问次数：157

企业档案

会员类型：初级版会员

已获得易推广信誉等级评定

18成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

易推广初级版会员：9年

工商认证【已认证】

最后认证时间：

注册号：【已认证】

法人代表：【已认证】

企业类型：经销商【已认证】

注册资金：人民币888万【已认证】

产品数：10016

参观次数：2234258

手机网站：http://m.yituig.com/c132299/

商铺地址：http://

产品分类

详细内容

FUCHS RENOLIN AW68价格

福斯润滑油系列 > 液压油 > 福斯抗磨液压油AW32/46/68 FUCHS AW抗磨液压油

福斯抗磨液压油AW32/46/68 FUCHS AW抗磨液压油　详细说明　（浏览1375次）

FUCHS RENOLIN AW系列详细信息:

RENOLIN AW

Zinc- ａnd Ash-Free HM Hydraulic Oils ａnd CKC Lubricating Oils

Zinc- ａnd Ash-Free HM Hydraulic Oils ａnd CKC Lubricating Oils

Zinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- ａnd ash-free HM hydraulic oils complying with ISO 6743-4.

The most important features of RENOLIN ZAF B hydraulic oils are:

Application:

RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743-6 in gearboxes, bearings ａnd circulating systems. RENOLIN ZAF B products are recommended for use in machine tools where contact between hydraulic oils ａnd metalworking fluids can take place.

RENOLIN AW		32	46	68
Hydraulic oil type
acc. to ISO 6743-4		HM 32	HM 46	HM 68
acc. to DIN 51 502		HLP 32	HLP 46	HLP 68
Lubricating oil type
acc. to ISO 6743-6		CKC 32	CKC 46	CKC 68
acc. to DIN 51 502		CLP 32	CLP 46	CLP 68
Characteristics	Unit				Test method
Colour		1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	31.5	45	65.4	ASTM D 445
at 100 °C	mm²/s	5.3	6.7	8.4	ASTM D 445
Viscosity index		98	101	98	ASTM D 2270
Density at 15 °C	kg/l	0.878	0.878	0.885	ASTM D 1298
Flash point, Cleveland open cup	°C	215	230	230	ASTM D 92
Pour point	°C	-30	-27	-21	ASTM D 97
Neutralization number	mg KOH/g	0.3	0.3	0.3	ASTM D 974
Saponification number	mg KOH/g	1.3	1.3	1.3	ASTM D 94
Water content	% mass	not traceable	not traceable	not traceable	ASTM D 95
Insolubles	% mass	not traceable	not traceable	not traceable	DIN 51 592
Demulsification	min	10	10	15	DIN 51 599
Air release at 50 °C	min	3	8	7	ASTM D 3427
Foaming,
seq. I	ml	30/0	50/0	50/0	ASTM D 892 seq. I-III
seq. II	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
seq. III	ml	20/0	20/0	20/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h	mg KOH/g	< 2	< 2	< 2	ASTM D 943
Brugger boundary friction test	N/mm²	38	DIN 51 347 (D)
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	DIN 51 354-2
Vickers vane pump test, loss of mass
on ring	mg	120	120	120	IP 281
on vanes after 250 h	mg	30	30	30	IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,