当前位置：易推广 > 其他产品/服务 > 其他产品/服务 > 其他产品/服务 > 深圳市深鹏孚润滑油有限公司 > 产品展示 > 福斯润滑油 > FUCHS PLANTOHYD 32 N价格

FUCHS PLANTOHYD 32 N价格

点击查看大图

价格：￥电议

型号：原产地：中国大陆发布时间：2018/5/17 11:11:41更新时间：2024/8/6 11:51:27

产品摘要：FUCHS PLANTOHYD 32 N 福斯润滑油系列 > 液压油 > FUCHS PLANTOHYD NFUCHS PLANTOHYD N　详细说明　（浏览650次）FUCHS PLANTOHYD NPrintEnvironmentally Friendly HETG Hydraulic Fluids and Lubr

产品完善度：访问次数：152

企业档案

会员类型：初级版会员

已获得易推广信誉等级评定

18成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

易推广初级版会员：9年

工商认证【已认证】

最后认证时间：

注册号：【已认证】

法人代表：【已认证】

企业类型：经销商【已认证】

注册资金：人民币888万【已认证】

产品数：10016

参观次数：2229308

手机网站：http://m.yituig.com/c132299/

商铺地址：http://

产品分类

详细内容

FUCHS PLANTOHYD 32 N

福斯润滑油系列 > 液压油 > FUCHS PLANTOHYD N

FUCHS PLANTOHYD N　详细说明　（浏览650次）

FUCHS PLANTOHYD N

Environmentally Friendly HETG Hydraulic Fluids ａnd Lubricating Oils Based on Vegetable Oils

Diagram

Environmentally Friendly HETG Hydraulic Fluids ａnd Lubricating Oils Based on Vegetable Oils

It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions ａnd spillages when handling gear ａnd lubricating oils lead to direct pollution of the surroundings ａnd thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils ａnd synthetic esters.

The PLANTOHYD N series of oils are based on vegetable oils. They represent an environmentally friendly alternative to mineral oil-based hydraulic oils ａnd can be classified as HETG fluids according to ISO/CD 6743-4.

The advantages of PLANTOHYD N are:

Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93)
German Water Hazard Class WGK 0, i.e. generally not hazardous for water
Non-toxic, physiologically harmless
Free of heavy metals
Excellent viscosity-temperature behaviour because of their high natural VI
Excellent anti-wear properties
Extremely shear-stable Rapid air release
Minimal foaming
Insoluble in water
Good demulsibility characteristics
Applicable at tank temperatures ranging from - 27 °C to +70 °C

PLANTOHYD N products are fully compatible with all materials usually found in hydraulic systems. The base fluids used in these products are non-toxic. The fluids are free of heavy metals ａnd chlorinated compounds.

Application:

PLANTOHYD N hydraulic oils can be used universally in all hydraulic ａnd general lubricating systems. These pro- ducts should always be used whenever there is a danger of soil or water pollution following a leak or spillage. The greatest potential for such occurrences are in the construction, water, agricultural ａnd forestry industries. The high viscosity index of PLANTOHYD N products give them multigrade characteristics.

We recommend that the miscibility ａnd compatibility of these products with mineral oil-based hydraulic oils should be checked on a case-by-case basis. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as vegetable oils. In general, we recommend the use of stainless steel tanks. "Free" metals, e.g. tin from soldered joints or zinc from galvanized components should be avoided if possible. Filter systems should also be compatible with vegetable oils.

The powerful cleaning effect of these fluids can dislodge large amounts of dirt ａnd contaminants ａnd this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOHYD N. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering ａnd drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %.

Our application engineers will be glad to advise you on:

Experiences with these products
Application possibilities
Material compatibility
Change-over procedures

ａnd service facilities regarding PLANTO products.

Typical data:

PLANTOHYD		32 N	46 N	68 N
Hydraulic oil type acc. to ISO/CD 6743-4 ａnd VDMA 24 658		HETG 32	HETG 46	HETG 68
Characteristics	Unit				Test method
Colour		1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	31.6	48.6	69.8	ASTM D 445
at 100 °C	mm²/s	7.4	10.6	13.9	ASTM D 445
Viscosity index		213	215	207	ASTM D 2270
Density at 15 °C	kg/l	0.921	0.924	0.927	ASTM D 1298
Flash point, Cleveland open cup	°C	>270	>270	>270	ASTM D 92
Pour point	°C	– 39	– 36	– 36	ASTM D 97
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	DIN 51 354-2