FUCHS RENOLIN MR 310 RENOLIN MR 310, 520, 1030 Multi-purpose oils for bearings, transmissions ａnd hydraulic systems with excellent viscosity-temperature behaviour PI 4-1054, Page 2, PM 4 / 02.16 Application RENOLIN MR 310, 520 ａnd 1030 are recommended for use as high-performance, high-VI multi-purpose lubricating oils when machines ａnd aggregates are exposed to changing temperatures, operated at low temperatures or when they are sensitive to variations in viscosity. They are especially vital when excellent corrosion protection is required. The high level of selected DD-additives gives excellent cleaning properties ａnd avoids the formation of sludge ａnd carbon residues. Surface-active substances form lubrication layers which avoid wear ａnd stick-slip phenomena. RENOLIN MR 310, 520 ａnd 1030 are recommended for sensitive hydraulic systems which are exposed to extreme temperature changes (e.g. in ski resorts, fire brigade technical units, etc.). Specifications RENOLIN MR 310, 520 ａnd 1030 fulfil ａnd surpass the specifications: • DIN 51524-3: HVLP(D) • ISO 6743-4: HV (with detergent / dispersant properties) • ISO 11158: HR (with detergent / dispersant properties) FUCHS SCHMIERSTOFFE GMBH Friesenheimer Straße 19 68169 Mannheim Phone +49 621 3701-0 Fax +49 621 3701-570 zentrale@fuchs-schmierstoffe.de ISO/TS 16949, ISO 14001 BS OHSAS 18001, ISO 50001 Reg. Nr. 2476 RENOLIN MR 310, 520, 1030 Multi-purpose oils for bearings, transmissions ａnd hydraulic systems with excellent viscosity-temperature behaviour PI 4-1054, Page 3, PM 4 / 02.16 Typical data: Product name MR 310 MR 520 MR 1030 Properties Unit Test method ISO VG 15 32 68 DIN 51519 Kinematic viscosity at – 20 °C at 0 °C at 40 °C at 100 °C mm2 /s mm2 /s mm2 /s mm2 /s 128 46 15 5.4 1051 - 32 8.0 6711 619 68 11.0 DIN EN ISO 3104 Viscosity index - 360 270 154 DIN ISO 2909 Density at 15 °C kg/m³ 855 886 873 DIN 51757 Flashpoint (COC) °C 118 154 214 DIN ISO 2592 Pourpoint °C - 48 - 57 - 36 DIN ISO 3016 Neutralisation number mgKOH/g 0.5 0.5 0.5 DIN 51558 Air release at 50 °C min 3 5 8 DIN ISO 9120 Foaming Sequence I: 24 °C Sequence II: 93,5 °C Sequence III: 24 °C after 93,5 °C ml ml ml 5/0 10/0 0/0 5/0 40/0 0/0 5/0 30/0 0/0 ASTM D 892 Copper corrosion, 100A24 Degree of corrosion 1 1 1 DIN EN ISO 2160 Steel corrosion, procedures A ａnd B 0 0 0 DIN ISO 7120 FZG mechanical gear test rig Failure load stage 11 11 11 DIN ISO 14635-1 Effect on SRE-NBR 1 sealing material at 100 °C ± 1°C after 7 days ± 2 h Relative volume change Change in shore A hardness % Units + 16.2 - 8 + 12.9 - 7 + 8.6 - 4 DIN 53521 ａnd DIN 53505 Electrical conductivity at - 22 °C pS/m 12000 12000 12000 FUCHS Inhouse Test