FUCHS RENOLIN PG 320 RENOLIN PG – synthetic, high-performance EP/AW gear oils based on polyalkylene glycol (PAG) CLP-PG oils/polyglycol Product name Description Density at 15°C [kg/m3 ] FLP. Cleveland [°C] Kin.Visc. at 40°C [mm2 /s] Kin.Visc. at 100°C [mm2 /s] VI Viscosity index Pourpoint [°C] Main application area RENOLIN PG 32 Fully synthetic gear ａnd circulating oils based on special polyalkylene glycols (PAG) for applications subject to extreme thermal loads. High oxidation ａnd aging stability, high viscosity index (shearstable), good viscosity-temperature behavior, excellent load-carrying capacity, low coefficients of friction, high FZG, good protection against micropitting, excellent FE8 performance, very good resistance to pitting. The RENOLIN PG series of oils surpass the minimum requirements of CLP-PG lubricating oils according to DIN 51517, Part 3 together with DIN 51502, ISO 6743-6 ａnd ISO 129251: CKC, CKD, CKE, (CKS), CKT. Approved by leading gearbox manufacturers. 1,022 220 32 7.1 194 –54 For gearboxes operating in extreme thermal ａnd mechanical conditions, such as worm gears ａnd calender lubrication. Can also be used as compressor oils for process gases such as methane, ethane, propane, etc. Particularly suitable for steel/bronze sliding pairs in worm gears. Not miscible or compatible with mineral oils. (Refer to product information 4-1293* for further details) RENOLIN PG 46 1,029 240 46 9.7 203 –48 RENOLIN PG 68 1,035 240 68 13.85 212 –51 RENOLIN PG 100 1,043 260 100 19.6 220 –48 RENOLIN PG 150 1,051 260 145 27.0 224 –51 RENOLIN PG 220 1,075 240 220 36.8 218 –33 RENOLIN PG 320 1,075 240 320 54.4 237 –36 RENOLIN PG 460 1,075 280 460 75.1 245 –36 RENOLIN PG 680 1,075 280 680 110.3 261 –33 RENOLIN PG 1000 1,075 280 1.000 162.0 281 –36