Concrete release agent emulsion, preferably for use in precast plants

Performance Features

• operating temperature up to 70 °C (shuttering temperature)
• SOK AQUA Z does not attack Styropor
• mineral oil- ａnd solvent free
• easy to re-apply
• largely prevents pore formation
• ensures the production of clean ａnd uniform surfaces
• contains very effective corrosion protection for steel shuttering
• does not impair the adhesion of plaster, adhesives ａnd painting work
• suitable for use on vertical surfaces
• good biodegradability

Description

SOK AQUA Z is an aqueous concrete release agent emulsion based on renewable raw materials. SOK AQUA Z is mineral oil- ａnd solvent free. SOK AQUA Z is very suitable for use with standard concrete, easy compacting concrete (ECC) ａnd self-compacting concrete (SCC).

Field of application

SOK AQUA Z is suitable for steel-coated-, plastic-coated- ａnd planed wooden shuttering.

Application

SOK AQUA Z is applied thinly ａnd uniformly onto the clean ａnd dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop-formation ａnd overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering. SOK AQUA Z may not be mixed with release agents, water, oils or solvents. It is ready for use!

Note

The container must be protected from frost ａnd direct solar radiation. The container is to be well sealed after each withdrawal.
The product is to be used within 6 months of production (for production date see barcode-label).
Please observe water resources policy act ａnd EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
The biological degradability of > 80 % is related to the oil phase (modified storm test, easily biodegradable).
Store cleaning rags wetted with SOK AQUA Z in a closed ａnd approved container.