Special concrete release agent – with marking effect – for polystyrene foam etc.

Performance Features

• free of hydrocarbon (mineral oil)
• no adverse effect on the adhesion of plaster, adhesives or paint
• basis: eco-friendly ester oils
• application temperature: up to 70 °C (shuttering temperature)
• rapidly biodegradable
• universally applicable
• prevents pore formation to a large extent
• provides clean ａnd uniform surfaces

Description

SOK MULTITRENN is a physico-chemically reacting concrete release agent suitable for all current absorbent ａnd non-absorbent shuttering, mainly in precast plants.

Field of application

The blue-colored product was especially developed for the use on polystyrene-foam (e.g. Styrofoam) formwork in ceiling ａnd wall production, ａnd for special applications in the production of supports, beams, ａnd trusses. After its application the blue dye of the product will be destroyed by the alkaline concrete. Thus the gray concrete surfaces will not change their color. The product is not used on the entire surface of the shuttering.

Application

A thin ａnd uniform layer of SOK MULTITRENN is applied by brush, dipping or suitable spraying device (with Teejet nozzle SS 800067) to the clean ａnd dry shuttering. The surfaces treated with SOK MULTITRENN are well visible due to blue coloration. Consumption rates: with non-absorbent shuttering: 20-30 m2/l; with absorbent shuttering: 15-20 m2/l. SOK MULTITRENN may not be diluted with water, oils or solvents – it is ready for use!

Notes

• the duration of storage should not exceed 1 year.
• store barrels horizontally
• reseal container after use

Please observe German federal water act (WHG) ａnd EU safety data sheet! Minor color differences of the product are due to production ａnd do not affect its quality ａnd efficiency. The product is not suitable for the use on white concrete ａnd very light-colored exposed concrete types.